Scientific and rational design

After the user has purchased our HPE7-A11 learning materials, we will discover in the course of use that our product design is extremely scientific and reasonable. Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our HPE7-A11 Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the HPE Network Campus Access Professional Architect Exam qualification question. Once you have submitted your practice time, HPE7-A11 study tool system will automatically complete your operation.

Continuous improvement of operating system

After decades of hard work, our products are currently in a leading position in the same kind of education market, our HPE7-A11 learning materials, with their excellent quality and constantly improved operating system, In many areas won the unanimous endorsement of many international customers. Advanced operating systems enable users to quickly log in and use, in constant practice and theoretical research, our HPE Network Campus Access Professional Architect Exam qualification question has come up with more efficient operating system to meet user needs, so we can assure users here , after user payment, users can perform a review of the HPE7-A11 exam in real time, because our advanced operating system will immediately send users HPE7-A11 learning material to the email address where they are paying, this greatly facilitates the user, lets the user be able to save more study time.

Quick delivery

Our product backend port system is powerful, so it can be implemented even when a lot of people browse our website can still let users quickly choose the most suitable for his HPE Network Campus Access Professional Architect Exam qualification question, and quickly completed payment. It can be that the process is not delayed, so users can start their happy choice journey in time. Once the user finds the learning material that best suits them, only one click to add the HPE7-A11 study tool to their shopping cart, and then go to the payment page to complete the payment, our staff will quickly process user orders online. In general, users can only wait about 5-10 minutes to receive our HPE7-A11 learning material, and if there are any problems with the reception, users may contact our staff at any time. To sum up, our delivery efficiency is extremely high and time is precious, so once you receive our email, start your new learning journey.

As the saying goes, practice makes perfect. We are now engaged in the pursuit of Craftsman spirit in all walks of life. Professional and mature talents are needed in each field, similarly, only high-quality and high-precision HPE Network Campus Access Professional Architect Exam qualification question can enable learners to be confident to take the qualification examination so that they can get the certificate successfully, and our HPE7-A11 learning materials are such high-quality learning materials, it can meet the user to learn the most popular test site knowledge. Because our experts have extracted the frequent annual test centers are summarized to provide users with reference. Only excellent learning materials such as our HPE7-A11 study tool can meet the needs of the majority of candidates, and now you should make the most decision is to choose our products.

DOWNLOAD DEMO

HP HPE7-A11 Exam Syllabus Topics:

HPE Network Campus Access Professional Architect Sample Questions:

1. A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what is the most cost-effective switch model for the distribution?

A) 6300F 24-port SFP+ and 4-port SFP56
B) 16300M 24p SFP+ LRM support and 2p 50G and 2p 25G MACsec
C) 6300M 24-port HPE Smart Rate 1/2.5/5GbE Class 6 PoE and 4-port SFP56
D) 6300M 48SR5 12p Class8 PoE and 36p Class6 PoE HPE Smart Rate 1G/2.5G/5G and 2p 50G and 2p 10G LRM

2. What is one use case for designing a 2-tier campus LAM instead of using a 3-tier?

A) Cross-campus traffic has grown beyond We capacity of a single collapsed core
B) The network has grown beyond a few building aggregation points
C) Access aggregation points are not scaling to meet traffic demands.
D) The campus has small buildings with only a few wiring closets.

3. Manufacturing A.B.C. is an international, mid-sized company specializing in producing industrial equipment. They have been in the market for over two decades and have established themselves as a reputable player in their industry. However, due to rapid technological advancements, their current network infrastructure is outdated and struggling to keep up with the demands of modern manufacturing processes.
Manufacturing A.B.C.'s network is a mix of multi-vendor legacy wired and wireless components, causing frequent downtime and hampering their production efficiency. The aging equipment leads to slow data transfer rates, unreliable connectivity, and increased vulnerability to cyber threats.
Fiber Cabling should be also upgraded as mostly OM2 is being used.
Compounding the network issues, the recent departure of the CTO has left the company without a clear direction for the network refresh project. There is a lack of consensus among the management team regarding the scope, budget, and timeline for the upgrade.
The primary objectives of the manufacturing customer are as follows:
- Improve network performance and reliability to enhance production processes and minimize downtime
- Enhance network security to protect sensitive data and intellectual property
- Streamline communication and collaboration among different departments within the organization
- Ensure scalability to accommodate future growth and technology advancements Manufacturing A.B.C. seeks a comprehensive network refresh that includes the following components:
- Upgrading the wired infrastructure to high-speed Ethernet switches to support increased data transfer rates and reduce latency
- Implementing a robust wireless solution with enterprise-grade access points to provide seamless connectivity across the manufacturing facility
- Centralized network management tools to simplify administration and monitoring of the network Expectations:
The customer expects the network refresh project to be handled efficiently, with minimal disruption to their ongoing operations. They are looking for a reliable and experienced network solutions provider who can understand their unique manufacturing requirements and deliver a customized solution that aligns with their budget constraints. The manufacturing customer is keen on receiving clear project proposals and support in decision-making, given the recent change of the CTO.
Your role as a network solutions provider is to address their concerns, offer expert guidance, and present a well-defined plan to meet their objectives effectively.
A manufacturing customer operates a 24/7 production facility and is concerned that the migration will disrupt the production chain.
What are two ways to minimize or eliminate this disruption? (Choose two.)

A) Create a migration plan which describes a phased approach, i.e. access layer first, distribution layer second, etc.
B) Replace one access switch at a time and patch the ports by using a patch plan.
C) Close the production site for at least 1 day to do the full migration in a single service window.
D) Whenever possible, ramp up the new infrastructure in parallel and do transparent switching from old to new core switch.

4. The customer recently found out that OS-CX switches are capable of Application Recognition.
Which two switch models should be used for that? (Choose two.)

A) 6400
B) 6300F/M
C) 6200F/M
D) 8360

5. Your colleague has created a proposed design for a large enterprise customer using HPE Aruba Networking AOS-CX 6300 switches at the wired access layer. The customer requires a secure, scalable solution based on Zero Trust Security (ZTS) principles.
In their current environment, endpoint devices connected to access switches are configured to send 802.1Q tagged frames, and the new design intends to tunnel traffic from the switches to an AOS-10 Gateway cluster using User-Based Tunneling (UBT) in its default mode.
During a design review, you're asked to assess whether this solution supports the customer's requirement to preserve the endpoint VLAN tags across the tunnel.
You recommend a change, stating that the proposed default configuration will not meet the customer's technical need.
Which UBT configurations would support the customer's requirement to preserve VLAN tagging from the endpoints across the UBT tunnel to the gateway?

A) Configure UBT extend VLAN mode, ensure VLAN 10 exists on the 6300 switch and at the cluster.
B) Configure UBT extend VLAN mode, VLAN 10 is only required to exist on the GW cluster.
C) Configure UBT reserved VLAN mode, make no VLAN assignment to the endpoint aruba user role applied on the switch.
D) Configure UBT reserved VLAN mode and assign VLAN 10 to the endpoint aruba user role applied on the switch.

Solutions: