100% Pass Top-selling ASIS-PSP Exams - New 2025 ASIS Pratice Exam
Physical Security Professional Dumps ASIS-PSP Exam for Full Questions - Exam Study Guide
ASIS-PSP certification is an important credential for security professionals looking to advance their careers and demonstrate their expertise in physical security. By passing the exam and maintaining their certification, professionals can demonstrate to employers and clients that they have the knowledge and skills necessary to effectively manage physical security risks and protect assets.
NEW QUESTION # 38
What can be used as servers and do not require special installation?
- A. Workstations
- B. Supercomputers
- C. Minicomputers
- D. None of the above
Answer: C
NEW QUESTION # 39
LANs and WANs can communicate with each other using a communications rule called:
- A. Ethernet Protocol packet
- B. XOP.210 Protocol packet
- C. Internet Protocol packet
- D. Protocol Assembly packet
Answer: C
NEW QUESTION # 40
The annual loss expectancy (ALE) formula is based on:
- A. Impact and frequency
- B. Impact and loss
- C. Risk and mitigation
- D. Frequency and risk
Answer: A
Explanation:
Annual Loss Expectancy (ALE) is calculated as:
ALE = Single Loss Expectancy (SLE) × Annual Rate of Occurrence (ARO),
which reflects the impact (SLE) and the frequency (ARO) of an event. This formula is a key component in risk assessment for determining expected financial loss.
A, B, and C are partially correct but not the accepted risk formula framework.
References:
PSP Study Guide - Risk Quantification Techniques
POA Manual - Risk Assessment and ALE Formula
NEW QUESTION # 41
Worms take over computer memory and deny its use to legitimate programs.
- A. True
- B. False
Answer: A
NEW QUESTION # 42
Who must regularly study and analyze the channels of communication to be certain that the input they receive is accurate, relevant, timely, concise and informative?
- A. Chief Minister
- B. Chief Information Officer
- C. Chief Security Officer
- D. Information Security Information Officer
Answer: C
Explanation:
The Chief Security Officer (CSO) is responsible for overseeing an organization's entire security posture- including physical, personnel, and sometimes information security. A crucial part of this role is ensuring that communication channels are effective. The CSO must analyze these channels regularly to ensure that the information received is accurate, relevant, timely, concise, and actionable for security operations and decision- making.
CIO (A) focuses on IT systems.
Information Security Officer (B) handles cybersecurity but may not oversee overall physical security.
Chief Minister (C) is a governmental/political role, not organizational security.
References:
ASIS POA Manual - Security Program Administration
PSP Study Guide - Security Leadership & Communication
NEW QUESTION # 43
What must be thought of as supportive of security operations rather than as the principal defense?
- A. Bonds
- B. Loss-prevention
- C. Insurance
- D. Premiums
Answer: C
Explanation:
Insurance should be viewed as a complementary component of a security program, not a replacement. It provides financial recovery after a loss has occurred but does not prevent the loss itself. Security operations- including physical barriers, surveillance, policies, and personnel-serve as the primary defense against threats. Insurance mitigates the financial impact only after an incident.
NEW QUESTION # 44
What might be the resentment of an employee who feels the vengefulness of an employee who has been passed over for promotion?
- A. desire
- B. opportunity
- C. motive
- D. all of the above
Answer: C
Explanation:
Motive is the internal drive or reason behind someone's actions. In this context, an employee who has been passed over for a promotion and feels resentment may develop a motive for misconduct, such as sabotage, theft, or workplace disruption.
Desire refers to the emotional want.
Opportunity is about environmental or procedural chances to act.
All of the above (D) includes broader elements, but the question specifically asks for what the resentment reflects - that is motive.
References:
ASIS POA Manual - Insider Threat and Human Behavior
PSP Study Guide - Domain 1: Personnel Risk Indicators
NEW QUESTION # 45
Which protocol divides the information into packets, sequentially numbers each packet, and inserts some error control information?
- A. Transmission Control protocol
- B. File Transfer protocol
- C. Information Control protocol
- D. None of the above
Answer: A
Explanation:
The Transmission Control Protocol (TCP) works with IP as part of the TCP/IP suite. It divides data into packets, numbers them sequentially, and adds error detection and correction codes. This ensures that data is transmitted reliably, in order, and without loss or corruption.
File Transfer Protocol (B) uses TCP but does not handle packet creation itself.
Information Control Protocol (C) is not a recognized protocol.
"None of the above" (D) is incorrect because TCP is the correct answer.
References:
PSP Study Guide - TCP/IP Protocol Functions
ASIS POA Manual - Reliable Data Transmission in Security Systems
NEW QUESTION # 46
One example of a company's intangible assets would be its:
- A. Patents
- B. Obsolete equipment
- C. Digital files
- D. Reputation
Answer: D
Explanation:
An intangible asset is non-physical but adds value to an organization. A company's reputation is a prime example-it influences customer trust, brand strength, and business continuity, especially in crisis situations.
A (Patents) are intellectual property, which are intangible but categorized differently.
C (Digital files) are tangible in terms of data assets.
D (Obsolete equipment) is a tangible depreciated asset.
References:
PSP Study Guide - Asset Classification
POA Manual - Valuation of Tangible vs. Intangible Assets
NEW QUESTION # 47
Advice commonly purchased from consultant consists of which of the following information?
- A. Number, quantity, and use of security personnel
- B. Alternatives in security hardware
- C. Direction and content of security policies and procedures
- D. All of the above
Answer: D
NEW QUESTION # 48
Testing designed to determine whether a system is functional, has adequate sensitivity, and meets design and performance objectives accurately describes which of the following?
- A. Site acceptance testing
- B. Factory acceptance testing
- C. Reliability performance testing
- D. Equipment performance testing
Answer: A
Explanation:
Comprehensive Detailed Explanation:
Site Acceptance Testing (SAT) verifies that a system has been installed properly and functions as intended in the actual operating environment. It checks for compliance with design specifications, performance standards, and functional reliability under real-world conditions.
A (Factory Acceptance Testing) occurs before delivery at the manufacturer's site.
B (Reliability testing) focuses on system stability over time.
C (Equipment performance testing) is narrower and usually component-level.
References:
PSP Study Guide - Security Systems Implementation and Validation
POA Manual - Testing and Commissioning of Security Systems
NEW QUESTION # 49
In its organizational functions, security encompasses which basic activities with varying degrees of emphasis?
- A. supervising, administrative, preventive, training
- B. managerial, detective, preventive, investigative
- C. managerial, administrative, preventive, investigative
- D. managerial, training, preventive, detective
Answer: C
NEW QUESTION # 50
A device that sends a signal about whatever is sensed to some other location is called:
- A. Wave device
- B. Circuit device
- C. Line device
- D. Signal device
Answer: B
NEW QUESTION # 51
A series of menus from which a person can access virtually any type of textual information is known as:
- A. Gophers
- B. Hyper-text based tool
- C. Symantec
- D. Consortium
Answer: A
Explanation:
Gopher is a hypertext-based information retrieval tool that predates the World Wide Web. It uses a series of text-based menus to allow users to navigate and access various types of textual information hosted on servers.
It was one of the first attempts at organizing and accessing online information in a user-friendly way.
Consortium (A) refers to a group or association, not a technology.
Hyper-text based tool (B) is descriptive but not the specific name of the system.
Symantec (C) is a cybersecurity software company, unrelated to menu-based text access systems.
References:
PSP Study Guide - Internet Tools and Information Systems
ASIS POA Manual - Early Internet Technologies
NEW QUESTION # 52
Based on non-delegable duty, contractual provisions that shift liability to the subcontractors have not been recognized by the courts and are called:
- A. Unrecognized holds
- B. Hold-on liabilities
- C. None of the above
- D. Hold harmless clauses
Answer: D
NEW QUESTION # 53
A good risk management program involves:
- A. Identify risks or specific vulnerabilities
- B. Study of security programs
- C. Analyze and study risks, including likelihood and degree of danger of an event
- D. All of the above
Answer: D
NEW QUESTION # 54
What involves walking or riding a given route to observe the condition of the facility?
- A. Posts
- B. Patrol duty
- C. Reserves
- D. None of the above
Answer: B
NEW QUESTION # 55
What occurs when the person who committed the act was able to foresee that the action would result in certain damages?
- A. Active resister
- B. International tort
- C. Lack of control
- D. None of the above
Answer: B
NEW QUESTION # 56
When yard space and warehousing is required even in urban areas, __________ is the boundary of the property owned by the company.
- A. Chain link
- B. Perimeter
- C. Wall
- D. Fence
Answer: B
Explanation:
In physical security, the term "perimeter" refers to the outer boundary of a property or facility. This includes fences, walls, gates, and other barriers that mark the edge of the secured area. In contexts where yard space and warehousing are used (such as in industrial or urban logistics operations), the perimeter defines the boundary of company-owned property and is critical for physical access control.
"Fence" (A) and "Wall" (B) are types of perimeter barriers.
"Chain link" (D) is a material used in fences, not a boundary in itself.
Perimeter protection is addressed in Domain 2: Application, Design, and Integration of Physical Security Measures.
# References:
ASIS International, Physical Security Principles (PSP) Study Guide - Domain 2 Protection of Assets (POA) Manual - Chapter: Perimeter Security ASIS Glossary of Security Terms
NEW QUESTION # 57
A series of menus from which a person can access virtually any type of textual information is known as:
- A. Gophers
- B. Hyper-text based tool
- C. Symantec
- D. Consortium
Answer: A
NEW QUESTION # 58
A person who already knows and understands the basics of loss prevention and security is known as:
- A. Supportive person
- B. Review personnel
- C. None of the above
- D. Engaged liaison
Answer: D
NEW QUESTION # 59
A bidder instruction document includes verification of:
- A. Experience and licenses
- B. Licenses and warranties
- C. Experience and warranties
- D. Licenses and financial statements
Answer: A
Explanation:
A bidder instruction document typically requests verification of a contractor's relevant experience and professional licenses. This ensures the vendor is qualified and legally authorized to perform the work.
A, C, and D include valid components but do not reflect the standard combination used for qualification.
References:
PSP Study Guide - Bidding Documentation
POA Manual - Procurement and Contractor Qualifications
NEW QUESTION # 60
......
ASIS ASIS-PSP Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Authentic Best resources for ASIS-PSP Online Practice Exam: https://www.examboosts.com/ASIS/ASIS-PSP-practice-exam-dumps.html
ASIS-PSP Test Engine Practice Exam: https://drive.google.com/open?id=12T7MXxgEDrlt3RznfLpvaCvo7RTwc0Az