[Apr-2025] Get 100% Real HPE0-S59 Exam Questions, Accurate & Verified ExamBoosts Dumps in the Real Exam!
Pass Your HPE Technical Exams Fast. All Top HPE0-S59 Exam Questions Are Covered.
HP HPE0-S59 exam is a 60-question multiple-choice exam that tests your knowledge of HPE compute solutions. HPE0-S59 exam covers a wide range of topics, including server architectures, storage solutions, networking, security, and virtualization. HPE0-S59 exam is designed to assess your ability to design and deploy HPE compute solutions that meet customer needs.
NEW QUESTION # 46
Which statement about HPE Superdome Flex 280 is true?
- A. It must be equipped with at least 768 GB of memory.
- B. It can support up to two nPars with an external RMC.
- C. it cannot be managed using HPE OneView.
- D. It supports 2 to 8 sockets in 2-socket increments.
Answer: A
NEW QUESTION # 47
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. RMC CLI to update I/O and HPE Persistent Memory firmware
- B. HPE SUM if HPE Persistent Memory firmware must be updated
- C. HPE OneView method for I/O firmware update procedure
- D. HPE OneView IT HPE Persistent Memory firmware must be updated.
Answer: B
Explanation:
HPE System Update Manager (SUM) is the recommended method for updating firmware on HPE Superdome Flex systems, especially when HPE Persistent Memory firmware needs to be updated. HPE SUM ensures that all firmware components are updated correctly and consistently, reducing the risk of compatibility issues.
NEW QUESTION # 48
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure the LACP failover trigger within the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
NEW QUESTION # 49
Which statement about an HPE Oneview support dump is true?
- A. Appliance support dump by default contains a logical enclosure support dump
- B. Preview support dump is available only when creating an appliance support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: A
Explanation:
An HPE OneView support dump includes various diagnostic information, and by default, it contains a logical enclosure support dump. This comprehensive dump helps in troubleshooting by providing detailed logs and configuration data from the appliance and the logical enclosures it manages, enabling effective diagnosis of issues within the managed environment.
NEW QUESTION # 50
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
Answer: C
Explanation:
To use FC (Fibre Channel) as a storage access protocol with HPE Primera to boot HPE Synergy compute nodes, you must add FC upgrade licenses in HPE OneView. These licenses enable FC connectivity for the HPE Virtual Connect SE 100Gb F32 Modules, allowing the compute nodes to connect to the FC storage.
NEW QUESTION # 51
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer has to create a new logical enclosure for the additional frame
- B. The additional frame must have HPE Virtual Connect FC modules installed
- C. The customer can grow the existing logical enclosure up to 5 frames
- D. The additional frame cannot have 12Gb SAS connection modules installed
Answer: A
NEW QUESTION # 52
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
Explanation:
TheLifecycle Managerin the vSphere Client interface is used for managing and updating ESXi hosts, including changing the ESXi image used in an OS Deployment Plan. This tool allows administrators to import, export, and apply different ESXi images, ensuring that the hosts are running the desired version and configuration of ESXi.
NEW QUESTION # 53
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE Synergy logical component with their respective definitions:
* Enclosure groupDefinition: Contains the configuration intended for a set of physical enclosures.
* Logical enclosureDefinition: A logical resource that defines a consistent configuration for an enclosure or a set of enclosures making up a logical enclosure.
* Logical interconnectDefinition: A single administrative entity that consists of the configuration for a set of interconnects in a single enclosure or a frame link topology.
* Logical interconnect groupDefinition: Acts as a recipe for creating a group that represents the available networks, uplink sets, and interconnect settings for a set of physical interconnects in a set of enclosures.
* Enclosure group: An enclosure group in HPE Synergy defines the configuration settings, including logical interconnect groups and firmware baselines, for a set of physical enclosures.
* Logical enclosure: A logical enclosure in HPE Synergy is a resource that includes one or more physical enclosures and their associated logical interconnects, providing a consistent configuration for those enclosures.
* Logical interconnect: A logical interconnect represents a set of interconnects within an enclosure, managed as a single entity. It includes the configuration of the interconnects and their connections.
* Logical interconnect group: A logical interconnect group (LIG) defines the network configuration, including available networks, uplink sets, and interconnect settings, that can be applied to multiple enclosures.
NEW QUESTION # 54
Refer to Exhibit:
Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?
- A. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.
- B. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.
- C. It is possible to update this logical interconnect without network downtime if orchestrated method is used.
- D. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.
Answer: C
NEW QUESTION # 55
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For the given downlink speed, the maximum number of frames is reached
- B. The master modules are located in the interconnect bays 2 and 5
- C. Both master modules are located in the same HPE S ynergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: C
NEW QUESTION # 56
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. Storage Container
- C. App Volume Set
- D. Virtual Volume Set
Answer: B
Explanation:
When you configure a vVol datastore using the HPE Storage Integration Pack for VMware vCenter, the storage object to check in SSMC (HPE StoreServ Management Console) is the Storage Container. The Storage Container is a logical storage entity that houses virtual volumes (vVols) and represents the vVol datastore in the storage system. Verifying the Storage Container ensures that the vVol datastore is properly configured and managed.
NEW QUESTION # 57
Your customer is trying to grow a VMware cluster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed.
Which tool should you use to troubleshoot the problem?
- A. vCenter Server to use the HPE OneView for VMware vCenter plugin to import the cluster for HPE OneView management.
- B. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
- C. iLO interface of a given HPE Synergy compute node to verify whether this node is registered within HPE OneView.
- D. HPE OneView for VMware vCenter Server to verify if the server profile template is properly imported and registered.
Answer: D
NEW QUESTION # 58
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- C. The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.
- D. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
Answer: A
Explanation:
HPE Synergy management rings have a maximum capacity for the number of frames they can manage. With
18 frames already managed in 6 logical enclosures, adding 5 more frames would exceed this capacity.
Therefore, the customer needs to create a new management ring for the new logical enclosure to ensure proper management and operation.
NEW QUESTION # 59
What is a restriction of using a RoCE network?
- A. It does not support Private VLAN and Multicast VLAN.
- B. It does not support smart link and private network features.
- C. It is by default configured as an untagged network and cannot be a part of a network set.
- D. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
Answer: B
Explanation:
A restriction of using a RoCE (RDMA over Converged Ethernet) network is that it does not support smart link and private network features. These features are essential for certain network configurations and use cases, but they are not available in RoCE networks, which are designed for high-performance, low-latency communication.
NEW QUESTION # 60
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 61
Which statement about the HPE D3940 storage module is true?
- A. SATA drives require redundant IO adapters to be installed in this module.
- B. Up to five modules can be installed in a single frame with Gen10 servers.
- C. It is configured through CLI available from HPE Synergy console.
- D. Only one type of drives (SATA, SAS, SSD) can be installed in each module.
Answer: A
NEW QUESTION # 62
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- D. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
Answer: D
Explanation:
The VMware vSphere Standard license does not include support for advanced features like Distributed Resource Scheduler (DRS) and Distributed Switches. These features are available onlywith the vSphere Enterprise Plus license. Therefore, to meet the customer's requirement of using Distributed Switches and a DRS cluster, the proposal should include vSphere Enterprise Plus licenses instead of Standard licenses.
NEW QUESTION # 63
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- D. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
Answer: C
NEW QUESTION # 64
Which statement about HPE Superdome Flex 280 is true?
- A. It must be equipped with at least 768 GB of memory.
- B. it cannot be managed using HPE OneView.
- C. It can support up to two nPars with an external RMC.
- D. It supports 2 to 8 sockets in 2-socket increments.
Answer: C
Explanation:
The HPE Superdome Flex 280 is a highly scalable server that supports 2 to 8 sockets in 2-socket increments.
This allows for flexible scaling of compute resources based on the needs of the workload, providing a balance between performance and cost.
NEW QUESTION # 65
Click the option that will allow you to create an OS Deployment Plan with customized kickstart.
Answer:
Explanation:
NEW QUESTION # 66
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
- B. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- C. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
- D. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
Answer: A
Explanation:
For VMware vSAN deployments, it is recommended that all drives in the D3940 storage modules be SSD drives to ensure optimal performance and efficiency. SSDs provide the necessary speed and reliability required by vSAN for handling storage-intensive operations and maintaining high performance.
NEW QUESTION # 67
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE MSA 2062 Storage Array is not supported in HPE OneView
- B. HPE Primera 650 can be managed using HPE OneView.
- C. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
- D. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- E. HPE OneView replaces array management tools for both types of array
Answer: A,B
Explanation:
* HPE MSA 2062 Storage Array is not supported in HPE OneView:HPE OneView does not provide management capabilities for the HPE MSA series, which includes the MSA 2062. These arrays must be managed using their dedicated management tools.
* HPE Primera 650 can be managed using HPE OneView:HPE OneView supports the management of HPE Primera storage arrays, including the Primera 650, allowing for integrated management and monitoring within the OneView environment.
NEW QUESTION # 68
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- B. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
- C. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- D. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
Answer: B
Explanation:
The HPE Storage Integration Pack for VMware vCenter is designed to provide management capabilities for HPE storage arrays within the VMware vCenter environment. However, it does not support MSA arrays. This means that while you can manage HPE Synergy Gen10 compute modules and HPE ProLiant Gen10 servers, the MSA array will not be manageable through the HPE Storage Integration Pack.
NEW QUESTION # 69
Your customer wants to update the firmware for 36 HPE Synergy 480 Gen 10 compute modules with a server profile assigned from a server profile template.
Put the steps required to achieve this goal on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To update the firmware for the HPE Synergy 480 Gen 10 compute modules with a server profile assigned from a server profile template, the steps should be performed in the following order:
* Upload SPP to HPE OneView repository.(First, the Service Pack for ProLiant (SPP) containing the firmware updates must be uploaded to the HPE OneView repository.)
* Select Firmware baseline within server profile template.(Next, you need to select the desired firmware baseline in the server profile template.)
* Select installation method (online or offline).(Choose whether the firmware updates will be installed online or offline.)
* Update all server profiles from the template.(Finally, update all server profiles from the modified template to apply the firmware updates to the compute modules.)
NEW QUESTION # 70
......
HPE0-S59 Exam is a proctored exam that consists of 60 multiple-choice questions. HPE0-S59 exam covers a wide range of topics, including HPE ProLiant, HPE BladeSystem, HPE Synergy, HPE Apollo, and HPE SimpliVity. HPE0-S59 exam also covers HPE OneView, HPE iLO, and HPE Integrated Lights-Out. It is recommended that candidates have a minimum of one year of experience with HPE products and technologies before attempting the HPE0-S59 Exam.
Penetration testers simulate HPE0-S59 exam: https://www.examboosts.com/HP/HPE0-S59-practice-exam-dumps.html
Free Test Engine For HPE Compute Solutions Certification Exams: https://drive.google.com/open?id=1A3t-em-wztJOEolICYzJKw4yc7xpyvP6