Download API API-580 Mock Test Study Material [Q59-Q84]

Share

Download API API-580 Mock Test Study Material

API-580 Questions Prepare with Learning Information

NEW QUESTION # 59
A physical condition or a release of a hazardous material that could result from component failure and result in human injury or death, loss or damage, or environ- mental degradation

  • A. Failure
  • B. Hazard
  • C. Loss

Answer: B


NEW QUESTION # 60
In most consequence evaluations, a key element in deter-mining the magnitude of the consequence is

  • A. Amount of surface area exposed due to toxic release
  • B. Physical area impacted by release
  • C. The volume of fluid released

Answer: C


NEW QUESTION # 61
____________ uses logic models depicting combinations of events

  • A. Process hazard analysis
  • B. Quantitative risk analysis
  • C. Qualitative risk analysis

Answer: B


NEW QUESTION # 62
When equipment has low deterioration rates as an inspector what you decide in lieu of internal inspection.

  • A. Out of service inspection
  • B. On-stream inspection
  • C. External inspection

Answer: B


NEW QUESTION # 63
Risk presented in qualitative risk analysis as

  • A. Form of event tree and fault tree
  • B. Precise numeric value
  • C. Form of risk matrix

Answer: C


NEW QUESTION # 64
____________deals with total risk than with risk involve only with the equipment.

  • A. RBI
  • B. PHA
  • C. QRA
  • D. FTA

Answer: C


NEW QUESTION # 65
Rbi is based on

  • A. Risk mitigation principles
  • B. Sound, proven risk assessment and management principles
  • C. Pha principles
  • D. Hazop principles

Answer: B


NEW QUESTION # 66
Risk presented in quantitative risk analysis as a

  • A. Precise numeric value
  • B. Form of event tree and fault tree
  • C. Form of risk matrix

Answer: A


NEW QUESTION # 67
The consequences of environmental damage are best understood by

  • A. Toxic concentration
  • B. Release
  • C. Volume of fluid
  • D. Cost

Answer: A


NEW QUESTION # 68
__________ is not a substitute for a process hazards analysis (PHA) or HAZOP

  • A. RBI
  • B. HAZOP
  • C. PHA
  • D. REM

Answer: C


NEW QUESTION # 69
A RBI analysis shares many of the techniques and data requirements with a ____________.

  • A. Event tree
  • B. PHA
  • C. HAZOP
  • D. QRA

Answer: D


NEW QUESTION # 70
Outcome of an event

  • A. Risk
  • B. Event
  • C. Consequence

Answer: C


NEW QUESTION # 71
Qualitative analysis is done and the outcome will be

  • A. Only in report
  • B. Exact number
  • C. High, medium and low or range

Answer: B


NEW QUESTION # 72
Is key to performing deterioration mechanism identification

  • A. Understanding equipment operation and its safety protective measures
  • B. Understanding equipment operation and process upsets
  • C. Understanding equipment operation and the interaction with the chemical and mechanical environment

Answer: C


NEW QUESTION # 73
Consequence side of the risk equation is normally managed by

  • A. Management
  • B. B&C
  • C. Process safety personnel
  • D. Inspection alone

Answer: A


NEW QUESTION # 74
Consequence is always.............For safety aspects

  • A. Positive
  • B. Neutral
  • C. Negative

Answer: C


NEW QUESTION # 75
Hazard identification in a RBI analysis generally focuses on identifiable failure mechanisms in the equipment
(inspectable causes) but does not explicitly deal with

  • A. Other potential failure resulting from events such as flammable fire due to leak from equipment
  • B. Environmental impact caused due to toxic release
  • C. Other potential failure scenarios resulting from events such as power S failures or human errors

Answer: C

Explanation:
Explanation/Reference:


NEW QUESTION # 76
The programme that focused on maintaining the mechanical integrity of pressure equipment items and
minimizing the risk of loss of containment due to deterioration

  • A. PHA
  • B. Hazop
  • C. Rem
  • D. RBI

Answer: D


NEW QUESTION # 77
Provides a basis for risk evaluation, riskmitigation and risk acceptance

  • A. Risk estimation
  • B. Risk identification
  • C. Risk evaluation

Answer: A


NEW QUESTION # 78
The risk prior to mitigation activities

  • A. Mitigated risk
  • B. Unmitigated risk
  • C. Known risk

Answer: B


NEW QUESTION # 79
Failure mode can primarily affects the

  • A. Magnitude
  • B. A&B
  • C. Consequences

Answer: A


NEW QUESTION # 80
Limitation of any negative consequence or reduction in probability of a particular event

  • A. Residual
  • B. Mitigation
  • C. Reduction

Answer: C


NEW QUESTION # 81
_________ are the primary inputs into the probability of failure evaluation.

  • A. Fluid toxicity and its concentration
  • B. Loss of containment f fluid
  • C. Damage mechanisms and its severity
  • D. The deterioration mechanisms, rates and susceptibilities

Answer: D


NEW QUESTION # 82
Rbimay include methodologiestoassess the effectiveness ofthe management systems in maintaining

  • A. Mechanical integrity
  • B. Total asset integrity
  • C. Plant integrity

Answer: A


NEW QUESTION # 83
If the material of construction and internal/external conditions are the same

  • A. Need to consult Equipment Engineer for final decision
  • B. Inspection results can be related from one equipment can be related to the other equipment
  • C. We cannot do that, since we do not know about it

Answer: B


NEW QUESTION # 84
......

Most Reliable API API-580 Training Materials: https://www.examboosts.com/API/API-580-practice-exam-dumps.html

Practice Material for API-580 Exam Question Preparation: https://drive.google.com/open?id=1XbZ4r4va5wRFun1eONzVU1S4R0g4w5nx