Download Fortinet FCSS_NST_SE-7.6 Mock Test Study Material
FCSS_NST_SE-7.6 Questions Prepare with Learning Information
NEW QUESTION # 12
Refer to the exhibit, which shows a partial output from the get router info routing-table database command.
The administrator wants to configure a default static route for port3 and assign a distance of 50 and a priority of 0.
What will happen to the port1 and port2 default static routes after the port3 default static route is created?
- A. Both default static routes shown in the output will be injected into the FIB.
- B. The port2 default static route will be injected into the forwarding information base (FIB).
- C. Neither of the routes shown in the output will be injected into the FIB.
- D. The port1 default static route will be injected into the FIB.
Answer: B
NEW QUESTION # 13
Refer to the exhibit, which contains the output of diagnose vpn tunnel list.
Which command will capture ESP traffic for the VPN named DialUp_0?
- A. diagnose sniffer packet any 'ip proto 50'
- B. diagnose sniffer packet any 'host 10.0.10.10'
- C. diagnose sniffer packet any 'esp and host 10.200.3.2'
- D. diagnose sniffer packet any 'port 4500'
Answer: D
NEW QUESTION # 14
Refer to the exhibit.
Assuming a default configuration, which three statements are true? (Choose three.)
- A. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
- B. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
- C. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.
- D. Strict RPF is enabled by default.
- E. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
Answer: A,C,E
NEW QUESTION # 15
Exhibit.
Refer to the exhibit, which shows the output of get system ha status.
NGFW-1 and NGFW-2 have been up for a week.
Which two statements about the output are true? (Choose two.)
- A. If FGVM...649 is rebooted. FGVM...650 will become the primary and retain that role, even after FGVM...649 rejoins the cluster.
- B. If a configuration change is made to the primary FortiGate at this time, the secondary will initiate a synchronization reset.
- C. If no action is taken, the primary FortiGate will leave the cluster because of the current sync status.
- D. If port 7 becomes disconnected on the secondary, both FortiGate devices will elect itself as primary.
Answer: A,D
NEW QUESTION # 16
Exhibit 1.
Exhibit 2.
Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)
- A. Configure set snat-route-change enable.
- B. Change the priority of the port! static route to 11.
- C. Configure unset snat-route-change to return it to the default setting.
- D. Change the priority of the port2 static route to 5.
Answer: A,B
NEW QUESTION # 17
Which two statements about an auxiliary session ate true? (Choose two.)
- A. With the auxiliary session setting disabled, for each traffic path. FortiGate uses the same auxiliary session.
- B. With the auxiliary session selling disabled, only auxiliary sessions are offloaded.
- C. With the auxiliary session setting enabled. Iwo sessions are created in case of routing change.
- D. With the auxiliary session setting enabled. ECMP traffic is accelerated to the NP6 processor.
Answer: C,D
NEW QUESTION # 18
In the SAML negotiation process, which section does the Identity Provider (IdP) provide the SAML attributes utilized in the authentication process to the Service Provider (SP)?
- A. Authentication Response
- B. SP Login dump
- C. Assertion dump
- D. Authentication Request
Answer: C
NEW QUESTION # 19
Refer to the exhibit, which shows a session entry.
Which statement about this session is true?
- A. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
- B. It is an ICMP session from 10.1.10.1 to 10.200.5.1.
- C. Return traffic to the initiator is sent lo 10.200.1.254.
- D. Return traffic to the initiator is sent to 10.1.0.1.
Answer: B
NEW QUESTION # 20
In which two slates is a given session categorized as ephemeral? (Choose two.)
- A. A TCP session waiting for the SYN ACK
- B. A TCP session waiting for FIN ACK
- C. A UDP session with only one packet received
- D. A UOP session with packets sent and received
Answer: A,C
NEW QUESTION # 21
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?
- A. FortiGate uses the SNI from the user's web browser.
- B. FortiGate uses the CN information from the Subject field in the server certificate.
- C. FortiGate uses the first entry listed in the SAN field in the server certificate.
- D. FortiGate closes the connection because this represents an invalid SSL/TLS configuration.
Answer: B
NEW QUESTION # 22
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.
What two conclusions can you draw Itom the output? (Choose two.)
- A. The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.
- B. The logon event can be seen on the collector agent installed on Windows.
- C. FSSO is using agentless polling mode to detect logon events.
- D. FSSO is using DC agent mode to detect logon events.
Answer: A,C
NEW QUESTION # 23
Refer to the exhibit, which shows the modified output of the routing kernel.
Which statement is true?
- A. The BGP route to 10.0.4.0/24 is not in the forwarding information base.
- B. The default static route through port2 is in the forwarding information base.
- C. The default static route through 10.200.1.254 is not in the forwarding information base.
- D. The egress interface associated with static route 8.8.8.8/32 is administratively up.
Answer: A
NEW QUESTION # 24
An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.
If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?
- A. diagnose sniffer packet any 'udp port 500'
- B. diagnose sniffer packet any 'udp port 4500'
- C. diagnose sniffer packet any 'ah'
- D. diagnose sniffer packet any 'lp proto 50'
Answer: D
NEW QUESTION # 25
Which exchange lakes care of DoS protection in IKEv2?
- A. IKE_Req_INIT
- B. IKE_SA_NIT
- C. Create_CHILD_SA
- D. IKE_Auth
Answer: A
NEW QUESTION # 26
Refer to the exhibit, which shows partial outputs from two routing debug commands.
Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?
- A. Set preserve-session-route to enable.
- B. Set the priority of the static default route using port2 to 1.
- C. Set snat-route-change to enable.
- D. Set the priority of the static default route using port1 to 10.
Answer: D
NEW QUESTION # 27
Refer to the exhibit, which shows the output of a debug command.
Which two statements about the output are true? (Choose two.)
- A. The interlace is part of the OSPF backbone area.
- B. In the network connected to port4, two OSPF routers are down.
- C. One of the neighbors has a router ID of 0.0.0.4.
- D. There are a total of five OSPF routers attached to the vorz4 network segment
Answer: A,B
NEW QUESTION # 28
......
Most Reliable Fortinet FCSS_NST_SE-7.6 Training Materials: https://www.examboosts.com/Fortinet/FCSS_NST_SE-7.6-practice-exam-dumps.html
Practice Material for FCSS_NST_SE-7.6 Exam Question Preparation: https://drive.google.com/open?id=1WdAbWitETRIo3bGdw-2BAnj1HntsIxSr