Get Nov-2024 Dumps to Pass your D-VXR-DY-01 Exam with 100% Real Questions and Answers
Updated Exam D-VXR-DY-01 Dumps with New Questions
NEW QUESTION # 139
Match each component of the VxRail HCI System Software to its description.
Answer:
Explanation:
NEW QUESTION # 140
When populating the VxRail Installation wizard for an External vCenter solution, what is the correct format for hostnames?
- A. vCenter, PSC, and VxRail Manager should use host name only
- B. vCenter and PSC should use FQDN; VxRail Manager should use host name only
- C. vCenter, PSC, and VxRail Manager should use FQDN
- D. VxRail Manager and vCenter should use FQDN; PSC should use host name only
Answer: A
NEW QUESTION # 141
An implementation engineer has just completed the deployment of a new VxRail cluster. They are unable to connect to the vCenter Server.
What can they use to confirm the physical health of the VxRail nodes?
- A. SRS
- B. iDRAC
- C. vSphere Client
- D. VxRail Manager
Answer: B
NEW QUESTION # 142
A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.
What is an expected benefit of programmatically gathering VxRail information?
- A. Perform pre-checks for vSAN health
- B. Perform node shutdowns and specific operations
- C. Obtain status of all running operations on a cluster
- D. Automate iDRAC firmware management and status
Answer: C
NEW QUESTION # 143
A VxRail cluster is being installed with Dell ToR switches at a "dark site." The administrator is not able to use the NVT tool.
Which command can they run on the ToR to verify VLANs are created, active, and properly configured on the uplink ports?
- A. show port-channel summary
- B. ping default gateway
- C. show vlan
- D. show interface status
Answer: C
NEW QUESTION # 144
How can an administrator manually verify DNS records for a VxRail implementation?
- A. nslookup
- B. ping
- C. ipconfig/all
- D. ping -a
Answer: A
NEW QUESTION # 145
VxRail Validation is failing for a deployment engineer during initialization. The error states that Node 1 cannot reach Node 2 on the Management network. While investigating the issue, the deployment engineer is unable to ping the management network default gateway.
Which step in the VxRail Configuration Portal should have been followed to prevent the situation?
- A. The cluster should have been configured with two virtual distributed switches.
- B. The Pre-Deployment Checklist should have been reviewed and issues resolved.
- C. The VxRail Manager and vCenter server must be logically separated on different subnets.
- D. The NIC Configuration must be set to 4x25GbE to support the network devices.
Answer: B
NEW QUESTION # 146
An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster.
How many VMs are licensed to be protected on the cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 147
Which functionality is provided by the VxRail vCenter plug-in - Physical View?
- A. LED indicator activation, initiate a disk replacement, and BIOS parameter change
- B. Hardware alerts, LED indicator activation, and initiate power supply replacement
- C. Hardware alerts, BIOS and firmware versions, and initiate a disk replacement
- D. BIOS and firmware versions, cluster shutdown, and initiate BIOS and firmware update
Answer: C
NEW QUESTION # 148
A customer is configuring VxRail to connect to an existing, external SRS VE. Their support account is associated with the Site ID/Party ID where VxRail is installed. A validation error is issued when the customer attempts to register VxRail in SRS.
What is the possible cause for the error?
- A. Wrong IP address was used for SRS VE gateway
- B. Number of deployed devices on SRS gateway has exceeded the maximum
- C. Status of VxRail in Install Base is 'Shipped'
- D. SRS traffic goes through a proxy server
Answer: C
NEW QUESTION # 149
A company is in the process of configuring their Top of Rack (ToR) switches as a single rack that replicates to a secondary data center with vSphere Replication.
What is a consideration for this configuration?
- A. IPv6 and IPv4 multi-cast traffic should span layer-2 between data centers
- B. IPv6 and IPv4 multi-cast should be layer-3 routed between data centers
- C. IPv6 and IPv4 multi-cast should span the entire network in each data center
- D. IPv6 and IPv4 multi-cast traffic does not need to leave the ToR switches
Answer: C
NEW QUESTION # 150
A system administrator wants to collect a generated log file via the VxRail REST API.
Which command should they use?
- A. POST /v1/support/logs/
- B. POST /v1/support/logs/<Log_ID>/download
- C. GET /v1/support/logs/<Log_ID>/download
- D. GET /v1/support/logs/<Log_ID>
Answer: C
NEW QUESTION # 151
What is configured by default during the initial deployment of a VxRail cluster with All-Flash nodes?
- A. RAID-5 vSAN storage policy
- B. AID-1 vSAN storage policy
- C. vSAN Deduplication and compression
- D. vSAN Performance Service
Answer: B
NEW QUESTION # 152
When validating the VxRail health just after the VxRail initial configuration, there is a red exclamation mark on the MARVIN-Virtual-SAN-Cluster and the reported health alarm is 'Component metadata health'.
A "Retest" action in the health service panel is performed and all the nodes in the cluster show health status as failed with the invalid state. Investigation does not reveal any hardware issues with the disks in use by vSAN.
What action should be taken next?
- A. Reapply the MARVIN storage policy to the VxRail internal virtual machines
- B. Evacuate and destroy the disk/disk group that contains the component(s) reporting errors and clear the alarm
- C. Wait 24 hours, then click the "Retest" button again
- D. Apply the vSphere ESXi600-201611001 patch, then click the "Retest" button again
Answer: D
NEW QUESTION # 153
You have been asked to deploy a single, 4 node VxRail cluster for company. They would like to migrate from their existing vSphere 6.5 environment. They have also asked that vCenter Enhanced linked-mode be supported.
Based on best practice, what is the recommended deployment model?
- A. Use existing vCenter 6.5 with External PSC
- B. Use existing vCenter 6.5 with Embedded PSC
- C. Deploy Internal vCenter with Embedded PSC
- D. Deploy Internal vCenter with External PSC
Answer: C
NEW QUESTION # 154
What is the correct CLI command to collect only the vCenter logs on VxRail Manager?
- A. vc-support-bundle.sh -c
- B. generateFullBundle.py -v
- C. vc-support.sh -v
- D. generateLogBundle.py -c
Answer: D
NEW QUESTION # 155
View the Exhibit.
You are reviewing a VxRail Pre-Installation Site Checklist.
What conclusion can be drawn about the VxRail deployment from the exhibit?
- A. Two Top of Rack (ToR) switches will be used
- B. Top of Rack (ToR) switches will use two uplink ports
- C. Two Upstream switches will be used
- D. Upstream switches will have two ISLs
Answer: D
NEW QUESTION # 156
......
100% Pass Guarantee for D-VXR-DY-01 Exam Dumps with Actual Exam Questions: https://www.examboosts.com/EMC/D-VXR-DY-01-practice-exam-dumps.html
Today Updated D-VXR-DY-01 Exam Dumps Actual Questions: https://drive.google.com/open?id=1Z6tWWDxRHN7fqm2zThIbBv6ftgnIszFM