[Jan 23, 2022] Updates Up to 365 days On Valid 1Z0-1066-20 Braindumps
Best Quality1Z0-1066-20 Exam Questions Oracle Test To Gain Brilliante Result
NEW QUESTION 18
Which is the proper fulfillment strategy to plan for supply using the appropriate lead times required for processing material at a third party, based on the manufacturing work definition?
- A. drop shipments
- B. contract manufacturing
- C. expense destination transfers
- D. outside processing operations
- E. back-to-back orders
Answer: D
NEW QUESTION 19
A customer has created a supply plan based on current requirement. Due to changes in third party forecast, the plan must be rerun with these recent updates. However, while this new information became available, existing supply like on-hand inventory and work order completions have also been updated.
Which data refresh option should be used to reflect all these changes in the plan?
- A. Do not refresh with current data
- B. Refresh with quick refresh option
- C. Refresh with forecast data
- D. Refresh with current data
- E. Refresh with selected current data
Answer: D
NEW QUESTION 20
During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)
- A. Collect Planning Data Process must be run from Planning.
- B. CSV file must be generated.
- C. Collect Legacy Data Process must be run from Planning.
- D. Load Interface File for Import Process must be run.
- E. Flat File must be zipped.
Answer: B,C,D
NEW QUESTION 21
Which calendar is supported in the supply planning process but does not support bucketing by week?
- A. Julian
- B. Lunisolar
- C. Roman
- D. Fiscal
- E. Gregorian
Answer: A
Explanation:
NEW QUESTION 22
As a new planner, you want to test simulation set functionality. You have created a simulation set named
'Test Simulation Set.' In this simulation set, you have already added Item 98573. You would like to change the item specification 'Fixed Order Quantity' to 10 within this simulation set.
Which sequence will allow you to accomplish this task?
- A. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find 'Fixed Order Quantity' > Change value to 10
- B. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'set value as' > under the 'Value' column enter 10 - C. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'reset to original' > under the 'Value' column enter 10 - D. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'View'
> Select 'Columns' > Check box next to Fixed Order Quantity specification> the 'Fixed Order Quantity' will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find
'Fixed Order Quantity' > Change value to 10
Answer: B
NEW QUESTION 23
Your client wants to utilize product categories on sourcing rules. They have created a new category for this and populated the items for it.
Where do they set up the category planning uses when evaluating sourcing rules?
- A. Manage Planning Profile Options
- B. Manage Planning Source Systems
- C. Manage Sourcing Rules
- D. Manage Plans
- E. Manage Assignment Sets
Answer: E
NEW QUESTION 24
Your clients want to simulate how canceling demand may impact a plan. Which two steps must be done to simulate this change? (Choose two.)
- A. Open plan > View Supplies and Demands > Remove the sales order from the plan and firm demand > Save changes
- B. Run plan with 'Refresh with current data'
- C. Open plan > View Supplies and Demands > Firm the demand and set firm quantity to 0 > Save changes
- D. Manage Plans > Edit Plan Options > Add simulation set
- E. Run plan with 'Do not refresh with current data'
Answer: C,E
NEW QUESTION 25
During an implementation, customer is in the process of planning supply requirements. Customer also needs to generate forecast and safety stock levels. Which plan type on the plan options should the customer be running?
- A. Safety Stock and Forecast Plan
- B. Demand Plan
- C. Demand and Supply Plan
- D. Integrated Plan
- E. Supply Plan
Answer: C
NEW QUESTION 26
Your client wants their supply plans to have a customized group of exceptions. What two steps must you complete in order to make sure only these exceptions are included when running all of your client's supply plans? (Choose two.)
- A. Configure Exception Sets > Create exception set > Add exceptions specified by client
- B. Select 'Add to Supply Plan' button > Select which supply plans you want to have this group of exceptions
- C. Manage Plans > Select each supply plan > Edit each supply plan > Manually add each exception specified by client
- D. Configure Exceptions > Expand Supply Planning Exceptions > Highlight lines with exceptions specified by client > Click 'Add to Exception Set'
- E. Manage Plans > Select each supply plan > Edit each supply plan > Add your exception set to Plan Options for each supply plan
Answer: A,E
NEW QUESTION 27
Which two statements are true when using Measure catalogs? (Choose two.)
- A. The measure catalog has a collection of measures that you can enable for use in a single plan in the Planning Central work area.
- B. Measure catalogs are defined in the system to improve the performance of the plan.
- C. You can add or remove measures from a measure catalog.
- D. You can restrict access to Measure Catalogs using Administer Data Security.
- E. The predefined measure catalog is not the system default.
- F. You navigate to Configure Measure Catalogs to edit the Catalog.
Answer: A,C
Explanation:
Explanation
References:
NEW QUESTION 28
Your client wants to create a supply plan that only considers sales order and disregards forecast demand within a specific demand horizon. What must you do to accomplish this?
- A. Manage Plans > Search and select demand plan > Demand tab > General tab > Check Demand Time Fence Control
- B. Manage Plans > Search and select supply plan > Supply tab > Organizations and Schedules tab > Remove all demand schedules
- C. Manage Plans > Search and select demand plan > Demand tab > General tab > Select 'Do no spread forecast'
- D. Manage Plans > Search and select supply plan > Supply tab > General tab > Check Demand Time Fence Control
- E. Manage Plans > Search and select supply plan > Supply tab > General tab > Advanced Options > Check 'Create time fence'
Answer: D
NEW QUESTION 29
A customer would like to account for the production loss in the supply planning process using the item shrinkage rate planning specification.
Which statement reflects the system behavior to meet this requirement?
- A. Planning calculation does not support shrinkage functionality.
- B. Planning calculates no additional demand but creates the additional required supply based on shrinkage factor.
- C. Planning process reduces the demand based on shrinkage factor and keeps the supply quantity as is.
- D. Planning calculation creates scrap demand to compensate for loss and maintains supply.
Answer: D
NEW QUESTION 30
You ran a demand plan and you are reviewing the shipments forecast value measure. It is always zero for a particular item. Identify the root cause of this problem.
- A. In plan parameters, shipment forecast value measure expression is not defined.
- B. In plan parameters, Item List Price marked as primary does not have price defined for the particular item.
- C. In planning measures catalog, shipment forecast measure is not enabled at item and organization level.
- D. In planning measures catalog, shipment forecast value measure is not enabled at item and organization level.
Answer: D
NEW QUESTION 31
You want to check how many items have excess inventory. Where must you go in Planning Central to find this information?
- A. Configure Exceptions > Expand Supply Planning Exceptions > Select Item With Excess Inventory
- B. Configure Exceptions > Expand Demand Planning Exceptions > Select Item With Excess Inventory
- C. Open Table, Graph, or Tile Set > Search Exceptions > Open > Expand Supply Planning Exceptions > Select Item with Excess Inventory
- D. Manage Plans > Edit Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
- E. Manage Plans > Edit Demand and Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
Answer: C
Explanation:
NEW QUESTION 32
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When Organization A, Organization B, and Organization C transfer from Organization C
- B. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
- C. When Organization A, Organization B, and Organization C make their own products
- D. When all organizations are buying from a single outside supplier
- E. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
Answer: B
NEW QUESTION 33
Your customer wants to be able to manually change the input values in purchase orders and transfer orders for the suggested plan recommendations. Which two recommendations are released by supply chain planning to Oracle Supply Chain Orchestration Cloud? (Choose two.)
- A. New planned orders for make, buy, and transfer of supplies
- B. Schedule planned orders for make, buy, and transfer of supplies
- C. Reschedules of sales orders, make, and buy
- D. Reschedules of existing make, buy, and transfer supplies
Answer: A,D
NEW QUESTION 34
You are viewing a drop shipment plan for your organization and you want to know which customer the purchase order will be shipped to. Where can you see that?
- A. You need to first drill down to the sales order from the supply-demand link, then open the sales order to get the customer.
- B. It is not viewable at this time.
- C. You can see the supplier on the sales order, but not vice-versa.
- D. You can see the customer on the supply in Supplies and Demand.
- E. It is visible in the drop ship analytics.
Answer: A
NEW QUESTION 35
Which release recommendation parameter can you utilize to govern the behavior of the auto-release process?
- A. Quick Release Time Fence
- B. Compression Days Tolerance for Automatic Release
- C. Release Only by User
- D. Auto-Release Planned Order Time Fence
- E. Auto-Release Interval in Days
Answer: A
NEW QUESTION 36
How can you deliver a forecast for drop shipments?
- A. Excel upload using File Based Data Import Process
- B. Create based on the supplier performance for drop shipment collection
- C. Create based on the drop shipment or booking history; the ship from will be the drop ship validation organization
- D. It cannot be done at this time.
- E. Generate manually using Planning Analytics
Answer: C
NEW QUESTION 37
Where do you view the collected data for Organizations, Customers, Suppliers, Carriers, and Interlocation Shipping Networks?
- A. Review Plan Inputs
- B. View Collected Data
- C. Maintain Supply Network Model
- D. Planning Analytics
- E. View Simulation Sets
Answer: C
NEW QUESTION 38
A supply plan has just been run that contains a configured item. You notice that the sourcing rules of the base model were used instead of sourcing rules for the configured item. Why did this happen?
- A. No planning percentages were defined at the operation level within the work definition.
- B. It is not possible to create sourcing rules for the configured item; all configured items always use the same sourcing rules as the base model.
- C. The sourcing rules of the base model had a priority of 1, while the sourcing rules of the configured item had a priority of 2.
- D. No sourcing rules have been defined for the configured item.
- E. The sourcing rules of the base model overrode the sourcing rules of the configured item.
Answer: D
NEW QUESTION 39
On the plan page layout that you created, you have several graphs showing the status of the plans and the business. You see a concern in an area and you want to see the data behind it. What navigation should you use to see this data?
- A. You cannot see it on the plan outputs, and you will need to create a new table with the information.
- B. You cannot see it from the plan landing page, and you will need to search for the data.
- C. On the table in question, go to View > Show table.
- D. Go to Actions > View Data on the graph in question.
- E. You cannot see it on the plan outputs, so you need to go into Planning Analytics and re-search the data.
Answer: B
NEW QUESTION 40
You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?
- A. The organization must be enabled in Manage Planning Parameters.
- B. The organization is an Item Organization.
- C. You do not have data access to the organization.
- D. The organization was not enabled for collection under Manage Planning Source Systems.
- E. The organization must be enabled in Manage Planning Profile Options.
Answer: D
NEW QUESTION 41
Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?
- A. Yes, if the adjustment is made below the aggregation level at which it is viewed.
- B. Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.
- C. Yes,if the demand plan hasn't been run again after adjustment.
- D. Yes,if the demand plan is approved and values are locked.
- E. No, both measures will always be different.
Answer: B
NEW QUESTION 42
......
Focus on 1Z0-1066-20 All-in-One Exam Guide For Quick Preparation: https://www.examboosts.com/Oracle/1Z0-1066-20-practice-exam-dumps.html