[Jun-2025] AMPP-SICT Senior-Internal-Corrosion-Technologist Exam Practice Dumps
2025 Senior-Internal-Corrosion-Technologist Premium Files Test pdf - Free Dumps Collection
NEW QUESTION # 22
Which product, when closely inspected has a green or ted layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. Fusion Bonded Epoxy
- B. Coal Tar Enamel
- C. 3-Layer Polyethylene (PE)
- D. 2-Layer Polyethylene (PE)
Answer: A
NEW QUESTION # 23
When environmental enclosures ate being used an inspector needs to be concerned about:
- A. Lighting
- B. a), b), and c)
- C. Structural integrity
- D. Air changes
Answer: B
NEW QUESTION # 24
Non-Conformance Reports are designed to:
- A. Assist the Owner in negotiating credits from the Contractor
- B. Elevate the status of the Inspector
- C. Punish the Contractor for substandard work
- D. To Identify items that do not meet the specification requirements
Answer: D
NEW QUESTION # 25
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 Inspector when you notice significant documentation errors.
Your FIRST preferred course of action Is to:
- A. Correct the errors yourself and suggest the Level 1 inspector be replaced
- B. Correct the errors yourself and submit the reports without any further action
- C. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- D. Correct die errors yourself and advise your supervisor that the Level 1 Inspector Is incompetent
Answer: C
NEW QUESTION # 26
The best choice of Instrument for holiday testing of thick film concrete coatings is:
- A. Low Voltage Sponge Type
- B. High Voltage AC
- C. High Voltage DC Constant Current
- D. High Voltage DC Pulse Type
Answer: C
NEW QUESTION # 27
You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified. This is not a good choice because: >
- A. It doesn't contain biocide
- B. The floating structure is stationary
- C. It contains biocide
- D. It will result in a very slippery surface
Answer: B
NEW QUESTION # 28
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface profile prior to coating
- B. Contamination levels prior to coating
- C. Surface cleanliness prior to coating
- D. Compressive and tensile strength prior to coating
Answer: C
NEW QUESTION # 29
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It Is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project.
You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot be found.
You FIRST preferred course of action Is to:
- A. Re-create the reports as not much was going on during night shift anyway
- B. Use creative writing to cover over the fact they are missing
- C. EXInot complete your report until they can be found
- D. Plainly state in your report that they are missing
Answer: D
NEW QUESTION # 30
Examples of non-ferrous metals include
Select All that Apply:
- A. aluminum
- B. mild steel.
- C. iron
- D. copper
Answer: A,B,D
NEW QUESTION # 31
In which type of concrete are laitance commonly encountered?
- A. Glass fiber cement
- B. Poured (wet cast)
- C. Concrete block (pouted with a form)
- D. Gunite
Answer: B
NEW QUESTION # 32
You ate the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no Individual gauge reading shall be below a certain value. As this is not part of the standard you should:
- A. Ignore the additional requirement
- B. Enforce the additional requirement
- C. Request clarification from the specifier
- D. Call your supervisor
Answer: C
NEW QUESTION # 33
A reinforced coating is
- A. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- B. equally resistant to movement and impact as a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to abrasion and impact as a non-reinforced coating.
Answer: C
NEW QUESTION # 34
Individuals conducting Coating Surveys should:
- A. Always be NACE or 5SPC Protective Coating Specialists
- B. Always be experienced Specification Writers
- C. Always be trained and experienced Coating Industry
- D. Always be NACE Level 3 Certified Inspectors
Answer: D
NEW QUESTION # 35
Which product Is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. Concrete
- B. Coal Tar Enamel
- C. 3-Layer Polyethylene (PE)
- D. 2-Layer Polyethylene (PE)
Answer: B
NEW QUESTION # 36
Which concrete smoothing technique Involves scrubbing a mixture of cement mortal over the concrete surface using a cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. High-pressure water washing
- C. Stoning
- D. Sacking
Answer: D
NEW QUESTION # 37
NACE International Standards are developed by:
- A. Government mandates
- B. Regional mandates
- C. Standard committees
- D. International mandates
Answer: B
NEW QUESTION # 38
......
Get ready to pass the Senior-Internal-Corrosion-Technologist Exam right now using our AMPP-SICT Exam Package: https://www.examboosts.com/AMPP/Senior-Internal-Corrosion-Technologist-practice-exam-dumps.html
A fully updated 2025 Senior-Internal-Corrosion-Technologist Exam Dumps exam guide from training expert ExamBoosts: https://drive.google.com/open?id=1hnX1DpnriFZRJOKNjvurLz3Kva6f3ZAa