[Nov-2021] The Best VMware Specialist Study Guide for the 5V0-31.20 Exam
5V0-31.20 certification guide Q&A from Training Expert ExamBoosts
VMware 5V0-31.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
NEW QUESTION 43
An administrator has been tasked with increasing the available capacity within an existing Cloud Foundation deployment to support the deployment of a production Workload Management cluster.
The VMware Cloud Foundation environment consists of a single workload called Production. The Production workload domain consists of a single vSAN Cluster called Production-01 that existing Virtual Machines. During the original deployment, even through automated firmware updates were not required, the Production workload domain was configured to use vSphere Lifecycle Images to automate its ongoing lifecycle management.
Four new hosts have been commissioned in SDDC Manager to support Workload Management. The new hosts are identically configured to the hosts that are currently deployed into the Production-01 cluster.
Which process must the administrator complete to enable Workload Management?
- A. Create a new vSAN Cluster within the Production workload domain
- B. Create a new vSAN Cluster within a new vSphere Lifecycle Manager Baseline-based workload domain.
- C. Extend the Production-01 vSAN cluster with the additional four hosts.
- D. Create a new vSAN Cluster within a new vSphere Lifecycle Manager Image-based workload domain.
Answer: C
NEW QUESTION 44
An administrator is tasked with preparing the hosts for a new VMware Cloud Foundation environment. The new environment will be installed in a facility far away from the administrator, and the hosts must be reachable remotely as soon as they are cable and powered-on in the rack. To reduce cost the new hosts do not have out of band management.
Which two steps should the administrator take to prepare for this deployment? (Choose two.)
- A. Validate MTU of 1600 is set on Management VLAN.
- B. Configure the VMware Imaging Appliance service.
- C. Create a Cluster Image profile
- D. Download the ESXi ISO and VIBs
- E. Configure UEFI support in the host BIOS-
Answer: A,B
NEW QUESTION 45
Which two statements accurately characterize vSphere Pods? (Choose two )
- A. A vSphere Pod can run only one container, and the minimum number of vSphere Pods in a cluster is three pods.
- B. A vSphere Pod can use normal vSphere Standard Switch and vSphere Distributed Switch
- C. A vSphere Pod is the smallest building block of vSphere with Tanzu that can run containerized applications.
- D. A vSphere Pod is a Kubemetes pod that runs on Tanzu Kubemetes Cluster
- E. A vSphere Pod is just a VM that runs a minimal version of Photon OS and container runtime on top of it.
Answer: C,D
NEW QUESTION 46
What is the advantage of using spwie and leaf underlay network over hierarchical multi-tier topology used in VMware Cloud Foundation?
- A. It is the only topology supported in VMware Cloud Foundation
- B. It supports 10 CiB/s connections for ESXi hosts.
- C. It provides greater flexibility especially when scaling out.
- D. It is required to support containers in VMware Cloud Foundation.
Answer: D
NEW QUESTION 47
The administrator for an existing VMware Cloud Foundation instance has one management domain (sfo-m01) and one workload domain (sfo-w01). The workload domain consists of two vSphere clusters (sfo-w01-ci01 and sfo-w01-cl02) using vSAN as principle storage.
The workload domain also includes an NSX-T Edge Cluster deployed in the default cluster (sfo-w01-c01) of the workload domain. The first cluster (sfo-w01-c01) rack1, and the second cluster (sfo-w01-c01) resides in rack 1.
A new project is underway, and the capacity of the second cluster (sfo-w0I cl02) of the workload domain that will be consumed by vRealize Automation needs to be expanded Rack 1 is at capacity. Eight additional hosts have been placed in rack 2 and cabled within the new rack. The network architecture is an L3 spine leaf architecture.
Which cluster expansion type should be selected when expanding the second cluster using the SDDC Manager UI?
- A. L3 non-uniform and L2
- B. L2 uniform
- C. L2 non-uniform and L3
- D. L2 non-uniform
Answer: B
NEW QUESTION 48
Which role is required to edit backup configuration in SDDC Manager?
- A. OPERATOR
- B. SUPER ADMIN
- C. ADMIN
- D. POWER USER
Answer: B
NEW QUESTION 49
What is required when creating storage policies for vSphere with Tanzu?
- A. Ensure that appropriate tags and attributes are added to the datastore
- B. Verify that the storage policies are set and will be assigned to the Supervisor Cluster.
- C. Ensure that the reference datastore in the storage policy is shared between all ESXi hosts in the cluster
- D. Verify that the storage policies are set and will be assigned to the Supervisor Namespace.
Answer: B
NEW QUESTION 50
An administrator is creating network pools.
What must be considered for sizing the network pools?
- A. Number of virtual machines
- B. Number of workload domains
- C. Number of users
- D. Number of pods
Answer: B
NEW QUESTION 51
An administrator is tasked with creating a federation between five VMware Cloud Foundation instances. What is the number of SDDC Manager instances that must be assigned the controller role to enable HA?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 52
An administrator creates a vSphere with Tanzu namespace.
Which two limits can be defined in namespace? (Choose two )
- A. Limits on NIOC
- B. Limits on storage IOPS
- C. Limits on CPU
- D. Limits on memory
- E. Limits on load balancer
Answer: D,E
NEW QUESTION 53
An administrator is required to deploy a new workload domain for a new business unit that must use its own NSX-I instance.
Which two Components will be deployed in the management domain during the workload domain creation? (Choose two.)
- A. Additional SDDC Manager
- B. Standalone Platform Services Controller
- C. NSX-T Manager
- D. vCenter Server
- E. NSX-T Edge node
Answer: C,E
NEW QUESTION 54
What is the benefit of placing vRealize Suite I ifecycle Manager on the cross-region Application Virtual Network?
- A. After a recovery, an administrator can continue using the same IP address, DNS record, and routing configuration
- B. SDDC Manager uses the cross-region network to deploy vRealize Log Insight and vRealize Automation Proxy Servers, and this is not configurable.
- C. vRealize Suite Lifecycle Manager can be deployed in cluster mode
- D. vRealize Suite Lifecycle Manager cannot be placed on the cross-region network as it is reserved for Workload VMs only.
Answer: D
NEW QUESTION 55
A customer would like to add capacity to run virtual machines with archiving software. Which workload domain can he used if NFS is the principal storage?
- A. Management Domain
- B. Kubernetes Workload Domain
- C. VI Workload Domain
- D. Horizon Workload Domain
Answer: C
NEW QUESTION 56
What is the minimum required number of hosts when deploying the VMware Cloud Foundation Management Domain?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 57
An administrator is tasked with configuring VMware Cloud Foundation NSX-T environment tor dynamic routing. Which routing protocol must be used?
- A. BGP
- B. RIP
- C. EIGRP
- D. OSPF
Answer: D
NEW QUESTION 58
An administrator creates a management domain using the VMware Cloud Bulkier appliance Which type of storage must be used as principal storage for the management domain?
- A. vSAN
- B. NFS
- C. VMFS on FC
- D. VMFS on FCoE
Answer: A
NEW QUESTION 59
Which step should be followed to restore SDDC Manager using the OVF tool?
- A. Move the SDDC Manager VM into the VI Workload Resource Pool.
- B. Retrieve the DNS name or IP address of a host m the management Domain
- C. Install the OVF Tool on a system in the VI Workload domain.
- D. Use the host s DNS name in the host password_vault-json, and this will display the root password
Answer: C
NEW QUESTION 60
Which prerequisite is correct for vRealize Automation when deploying vRealize Suite components using vRealize Suite Lifecycle Manager?
- A. Deploy Workspace ONE Access before vRealize Automation
- B. Deploy vRealize Operations Manager before vRealize Automation.
- C. Configure the vRealize Suite Lifecycle Manager appliance to use the ESXi host as a NTP source.
- D. Run an external vRealize Orchestrator workflow.
Answer: B
NEW QUESTION 61
A new security vulnerability has been identified in SSL. The VMware vCenter appliances in the company's latest VMware Cloud Foundation environment have been found to be impacted VMware has released an updated ISO and upgrade bundle.
Which method should the administrator use to remediate this security vulnerability?
- A. Use VMware Update Manager to apply the update.
- B. Update VMware Cloud Foundation to a release containing the patch.
- C. Use VMware Lifecycle Manager to apply the update.
- D. Use NSX-T Distributed Firewall to block all incoming traffic until the patch is applied.
Answer: A
NEW QUESTION 62
......
The Best VMware 5V0-31.20 Study Guides and Dumps of 2021: https://www.examboosts.com/VMware/5V0-31.20-practice-exam-dumps.html
5V0-31.20 Certification Overview Latest 5V0-31.20 PDF Dumps: https://drive.google.com/open?id=1yXyH1HjSaREIeG6OjHJvs97wTOeRou8e