[Oct 10, 2022] Fully Updated Dumps PDF - Latest NSE7_EFW-6.4 Exam Questions and Answers
100% Free NSE7_EFW-6.4 Exam Dumps to Pass Exam Easily from ExamBoosts
For more info read reference:
Exam Blueprint Preparatory Course
How much Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Cost
The Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Costs USD 400. As the exam costs may vary country or region vise, it is always recommended to check the official website to see what's the cost of the exam for your country. The total cost for preparing for the exam will include study materials as well as NSE7 EFW-6.4 exam dumps and NSE7 EFW-6.4 practice exams. Refer to the official website by clicking here for more info on pricing.
NEW QUESTION 36
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)
- A. OSPF interface area.
- B. OSPF interface cost.
- C. Interface subnet mask.
- D. OSPF interface MTU.
- E. Router ID.
Answer: A,C,D
NEW QUESTION 37
AFortiGate's portl is connected to a private network. Its port2 is connected to the Internet. Explicit web proxy is enabled in port1 and only explicit web proxy users can access the Internet. Web cache is NOT enabled. An internal web proxy user is downloading a file from the Internet via HTTP. Which statements are true regarding the two entries in the FortiGate session table related with this traffic? (Choose two.)
- A. One session has the proxy flag on, the other one does not.
- B. One of the sessions has the IP address of port2 as the source IP address.
- C. The destination IP addresses of both sessions are IP addresses assigned to FortiGate'sinterfaces.
- D. Both session have the local flag on.
Answer: B,D
NEW QUESTION 38
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in system conserve mode because of high memory usage.
- B. It is currently in FD conserve mode.
- C. It is currently in kernel conserve mode because of high memory usage.
- D. It is currently in system conserve mode because of high CPU usage.
Answer: A
NEW QUESTION 39
Viewthe exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. This web request was inspected using the root web filter profile.
- B. The web request was allowed by FortiGate.
- C. The requested URL belongs to category ID 52.
- D. FortiGate found the requested URL in its local cache.
Answer: C,D
NEW QUESTION 40
View the exhibit, which contains a partial output of an IKE real-time debug, and then answer the question below.
Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
- A. auto-discovery-receiver
- B. auto-discovery-shortcut
- C. auto-discovery-forwarder
- D. auto-discovery-sender
Answer: C
NEW QUESTION 41
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script on FortiManager, but the TCL script failed to apply any changes to the managed device after being run.
Why did the TCL script fail to make any changes to the managed device?
- A. The TCL script must start with tinclude <>.
- B. Changes to an interface configuration can be made only by a CLI script.
- C. The TCL command run_cmd has not been created.
- D. Incomplete commands are ignored in TCL scripts.
Answer: C
NEW QUESTION 42
Which two conditions must be met for a statistic route to be active in the routing table? (Choose two.)
- A. The outgoing interface is up.
- B. There is no other route, to the same destination, with a higherdistance.
- C. The next-hop IP address is up.
- D. The link health monitor (if configured) is up.
Answer: A,D
NEW QUESTION 43
Examine the following routing table and BGP configuration; then answer the question below.
TheBGP connection is up, but the local peer is NOT advertising the prefix 192.168.1.0/24. Which configuration change will make the local peer advertise this prefix?
- A. Disable the setting network-import-check.
- B. Enable the redistribution of connected routers into BGP.
- C. Enable the redistribution of static routers into BGP.
- D. Enable the setting ebgp-multipath.
Answer: A
NEW QUESTION 44
View the exhibit, which contains the partial output of a diagnose command, and then answer the question below.
Based on the output, which of the following statements is correct?
- A. Anti-reply is enabled.
- B. Remote gateway IP is 10.200.5.1.
- C. DPD is disabled.
- D. Quick mode selectors are disabled.
Answer: A
NEW QUESTION 45
View the exhibit, which contains an entry in the session table, and then answer the question below.
Which one of the following statements is true regarding FortiGate's inspection of this session?
- A. FortiGate applied explicit proxy-based inspection.
- B. FortiGate forwarded this session without any inspection.
- C. FortiGate applied proxy-based inspection.
- D. FortiGate applied flow-based inspection.
Answer: C
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
NEW QUESTION 46
Two independent FortiGate HA clusters are connected to the same broadcast domain. The administrator has reported that both clusters are using the same HA virtual MAC address. This creates a duplicated MAC address problem in the network. What HA setting must be changed in one of the HA clusters to fix the problem?
- A. Session pickup.
- B. Gratuitous ARPs.
- C. Group name.
- D. Group ID.
Answer: D
Explanation:
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-high-availability-52/HA_failoverVMAC.htm
NEW QUESTION 47
Refer to the exhibit, which contains the output of a BGP debug command.
Which statement about the exhibit is true?
- A. The local router has received a total of three BGPprefixes from all peers.
- B. Since the counters were last reset, the 10.200.3.1 peer has never been down.
- C. The local router has not established a TCP session with 100.64.3.1.
- D. The local router BGP state is OpenConfirm with the 10.127.0.75 peer.
Answer: C
NEW QUESTION 48
Which two statements about OCVPN are true? (Choose two.)
- A. FortiGate devices under different FortiCare accounts can be used to form OCVPN.
- B. OCVPN supports static and dynamic IPs in WAN interface.
- C. OCVPN offers only Hub-Spoke VPNs.
- D. Only root vdom supports OCVPN.
Answer: B,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.0.0/cookbook/977344/one-click-vpn-ocvpn
https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/496884/overlay-controller-vpn-ocvpn
NEW QUESTION 49
A FortiGate device hasthe following LDAP configuration:
The administrator executed the 'dsquery' command in the Windows LDAp server 10.0.1.10, and got the following output:
>dsquery user -samid administrator
"CN=Administrator, CN=Users, DC=trainingAD, DC=training, DC=lab"
Based on the output, what FortiGate LDAP setting is configured incorrectly?
- A. username.
- B. dn.
- C. cnid.
- D. password.
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD37516
NEW QUESTION 50
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
- B. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
- C. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- D. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
Answer: C
NEW QUESTION 51
Which the following events can trigger the election of a new primary unit in a HA cluster? (Choose two.)
- A. The FortiGuard license for the primary unit is updated.
- B. Primary unit stops sending HA heartbeat keepalives.
- C. One of the monitored interfaces in the primary unit is disconnected.
- D. A secondary unit is removed from the HA cluster.
Answer: B,C
NEW QUESTION 52
View the exhibit, which contains a screenshot of some phase-1settings, and then answer the question below.
The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:
However, the IKE real time debug does not show any output. Why?
- A. The log-filter setting was set incorrectly. The VPN's traffic does not match thisfilter.
- B. The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.
- C. The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.
- D. The debug shows only error messages. If there is no output, then the tunnel is operating normally.
Answer: A
NEW QUESTION 53
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs the debug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. Redirection of HTTP to HTTPS administrative access is disabled.
- B. The packet is denied because of reverse path forwarding check.
- C. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- D. HTTP administrative access is configured with a port number different than 80.
Answer: C,D
NEW QUESTION 54
Examine the output from the 'diagnose vpn tunnel list' command shown in the exhibit; then answer the question below.
Which command can beused to sniffer the ESP traffic for the VPN DialUP_0?
- A. diagnose sniffer packet any 'port 500'
- B. diagnose sniffer packet any 'host 10.0.10.10'
- C. diagnose sniffer packet any 'port 4500'
- D. diagnose sniffer packet any 'esp'
Answer: C
Explanation:
Explanation
NAT-Tis enabled. natt: mode=silentProtocol ESP is used. ESP is encapsulated in UDP port 4500 when NAT-T is enabled.
NEW QUESTION 55
Which real time debug should an administrator enable to troubleshoot RADIUS authentication problems?
- A. Diagnose debug application radius -1.
- B. Diagnose authd console -log enable.
- C. Diagnose debug application fnbamd -1.
- D. Diagnose radius console -log enable.
Answer: C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD32838
NEW QUESTION 56
What is the purpose of an internal segmentation firewall (ISFW)?
- A. It is the first line of defense at the network perimeter.
- B. It splits the network into multiple security segments to minimize the impact of breaches.
- C. It is anall-in-one security appliance that is placed at remote sites to extend the enterprise network.
- D. It inspects incoming traffic to protect services in the corporate DMZ.
Answer: B
Explanation:
Explanation
ISFW splits your network into multiple security segments. They serve as a breach containers from attacks that come from inside.
NEW QUESTION 57
......
Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:
- Fortinet NSE 7 - Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test
- Fortinet NSE 7 - SD-WAN
- Fortinet NSE 7 - Enterprise Firewall
- Fortinet NSE 7 - Advanced Threat Protection
- Fortinet NSE 7 - Secure Access
The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.
Free NSE7_EFW-6.4 Exam Questions NSE7_EFW-6.4 Actual Free Exam Questions: https://www.examboosts.com/Fortinet/NSE7_EFW-6.4-practice-exam-dumps.html
Verified NSE7_EFW-6.4 dumps and 124 unique questions: https://drive.google.com/open?id=18APM17ifUqnghwbk1OFSP4UnuZJgVFfO