Pass Your Exam With 100% Verified NS0-592 Exam Questions
NS0-592 Dumps PDF - NS0-592 Real Exam Questions Answers
NetApp NS0-592 Exam Certification Details:
| Duration | 120 minutes |
| Passing Score | 62% |
| Exam Code | NS0-592 NCSE ONTAP |
| Exam Name | Support Engineer ONTAP Specialist |
| Exam Price | $150 USD |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
NEW QUESTION 23
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned volume must be split from the source volume before the LAN can be used.
- B. The cloned LUN needs to be mapped to an initiator group.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned LUN must be brought online.
Answer: A
NEW QUESTION 24
Click the exhibit button.
Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?
- A. The InfiniBand cables should be connected in this configuration.
- B. For all MetroCluster configurations, this is expected output.
- C. The InfiniBand interconnect is not used in MetroCluster.
- D. This is a 2-node MetroCluster.
Answer: B
NEW QUESTION 25
In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.
Which three components should be verified to determine what is causing this problem? (Choose three.)
- A. the dark fiber cables between sites
- B. the ATTO bridge
- C. the fiber cable that is connecting the ATTO bridge to the switch
- D. the SFPs in the storage controllers
- E. the SFPs that are connecting the ATTO bridge to the switch
Answer: B,C,E
NEW QUESTION 26
Click the exhibit button.
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)
- A. Disk shelves 10 and 20 are cabled incorrectly to each other.
- B. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
- C. The DS2246 shelf is wrong; the shelf ID must be 11.
- D. The FAS2554 system is cabled incorrectly to shelf ID 20.
Answer: A,D
NEW QUESTION 27
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?
- A. NFSv4 file locks need to be broken manually before initiating an SFO operation.
- B. The export policies are incorrect and must be updated with node's HA partner LIF information.
- C. The clients are using NFSv4 to access the volumes.
- D. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
Answer: C
NEW QUESTION 28
Click the exhibit button.
A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?
- A. Move some volumes off the affected aggregate.
- B. Add more spindles.
- C. Perform the volume reallocation.
- D. Throttle the client traffic.
Answer: D
NEW QUESTION 29
Your customer states that the storage efficiency on their FAS 8200 is far below what they had expected for a VMware NFS datastore. They enabled deduplication three days ago. The job ran every night for only 10-20 minutes, and the space savings now is less than 5%.
What is causing the space savings to be so low?
- A. They have enabled aggregate-level inline data compaction, so the savings are at the aggregate level.
- B. They have not run a baseline deduplication to scan old data.
- C. They have enabled aggregate-level inline deduplication, so the savings are at the aggregate level.
- D. They have not enabled volume-level compression.
Answer: D
NEW QUESTION 30
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Configure a SyncMirror relationship to the remote location.
- B. Perform an NDMP dump to the remote location.
- C. Configure a SnapMirror relationship to the remote location.
- D. Perform a volume relocation to the remote location.
Answer: C
NEW QUESTION 31
Click the exhibit button.
The storage administrator for the company example.com is attempting to join an SVM to their Active Directory as SVM1. The computer account must also be joined to the Secure organizational unit. Attempts to perform this action using the CLI fail with the error message shown in the exhibit.
What is the reason for this error?
- A. The requested OU Secure has incorrect principal and errored with
KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN. - B. The requested OU Secure does not exist in the Active Directory and must be created by the Active Directory administrator.
- C. The syntax is incorrect; it should be vserver cifs create -cifs-server svm1 -domain example.com -ou ou=Secure, dc=example, dc=com.
- D. The administrator account password used in vserver cifs create was not entered correctly.
Answer: A
NEW QUESTION 32
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B.
The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)
- A. On the DR partner at site B, perform the process to heal the root aggregate.
- B. On the DR partner at site A, perform the process to heal the data aggregates.
- C. On the DR partner at site A, perform the process to switchover.
- D. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
Answer: A,C
NEW QUESTION 33
Click the exhibit button.
A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)
- A. Verify that the access-based-enumeration share parameter is configured.
- B. Verify that the oplocks share property is configured.
- C. Verify that -offline-files parameter is set to manual on the share.
- D. Verify that the continuously -available share parameter is configured.
- E. Verify that the -symlink-properties parameter is enabled on the share.
Answer: A,B,D
NEW QUESTION 34
A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN.
Which two statements are correct in this scenario? (Choose two.)
- A. Deduplication is inflating the LUN when it is brought online.
- B. The containing aggregate is thin-provisioned.
- C. The volume has snapshots.
- D. The fractional reserve is set to 0%.
Answer: B,C
NEW QUESTION 35
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an "access denied" error.
Which two statements would cause this error? (Choose two.)
- A. The export policy applied to the SVM's root volume does not allow the NFSv4 clients to access it.
- B. The export policy applied to the data volume does not allow clients to access it using NFSv4.
- C. The NFS server does not have NFSv4 enabled.
- D. The SVM's root volume allows execute access for all users.
Answer: B,D
NEW QUESTION 36
Click the exhibit button.
A customer's system reported several errors. There was no disruption, but the customer is concerned about the system's health.
Referring to the exhibit, which statement is true?
- A. One of the switches has failed.
- B. Port 1D on the system has failed.
- C. One of the IOM modules on shelf 20 has failed.
- D. Storage redundancy is degraded.
Answer: D
NEW QUESTION 37
After you replaced the motherboard, the node stopped in the "waiting for the cluster application to come online" state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)
- A. Verify the setting of the cluster interconnect switch.
- B. Verify that the physical links on the cluster ports are up.
- C. Check the status of the cluster with the cluster ring show command.
- D. Check the status of the HA with the interconnect-up field of storage failover show command.
Answer: C,D
NEW QUESTION 38
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)
- A. There are active SIS operations running.
- B. There are failed disks.
- C. There are active NFS connections.
- D. The HA interconnect is not operational.
Answer: B,D
NEW QUESTION 39
Click the exhibit button.
A customer has the ns-switch shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. Groups can be looked up both in the local database and in LDAP.
- B. Host names are always resolved using the configured DNS server.
- C. User mapping decisions are always based on the LDAP configuration.
- D. User names not present in the local database are looked up in LDAP.
Answer: A,B
NEW QUESTION 40
A customer's FAS8200 node1 went down an hour ago after a WAFL inconsistency error. All data is being served from partner node2, but the storage failover show command output is not showing a node1 as "Waiting for giveback".
What is the corrective action for this situation?
- A. From the LOADER prompt, run the wafliron command on the system's root aggregate.
- B. Boot the system and run the WAFL_check command on the inconsistent data aggregate.
- C. Re-create the root aggregate on node1.
- D. Boot the system and run the wafliron command on the inconsistent data aggregate.
Answer: C
NEW QUESTION 41
Click the exhibit button.
A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
- B. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
- C. You should configure e0M so that is tagged on VLAN 40.
- D. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.
Answer: C,D
NEW QUESTION 42
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. Use the ifstat command to collect network performance data for the physical interface.
- B. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
- C. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
- D. View the active network connections to the node to see if there a large number of active connections.
Answer: B
NEW QUESTION 43
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats volume
- B. lun stats -vserver
- C. statit
- D. stats lun
Answer: B,C
NEW QUESTION 44
Click the exhibit button.
Your customer has severe latency on one of their SATA aggregates. You run the statit -b and statit -e commands to obtain detailed disk statistics.
Referring to the output shown in the exhibit, which disk would be the problem?
- A. 0a.11.21
- B. 0a.11.19
- C. 0a.11.23
- D. 0a.13.21
Answer: B
NEW QUESTION 45
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The aggregates were manually brought offline.
- B. The bcomd user space process on cluster1-02 failed.
- C. The cluster-02 node is down.
- D. The mgwd user space process on cluster1-02 failed.
Answer: C
NEW QUESTION 46
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics performance show
- B. wafltop show -v -cpu -I 10 -c 5-n 6
- C. sysstat -c 30 -M 1
- D. qos statistics latency show
Answer: A
NEW QUESTION 47
......
NS0-592 Dumps 100 Pass Guarantee With Latest Demo: https://www.examboosts.com/NetworkAppliance/NS0-592-practice-exam-dumps.html