Prepare HPE6-A66 Question Answers - HPE6-A66 Exam Dumps
Real HP HPE6-A66 Exam Questions [Updated 2021]
Certification Path
The Aruba Certified Design Associate (ACDA) certification is valid for three years from date achieved. To recertify, you must pass one of the following exams before the expiration date:
- If qualified, pass the Aruba Edge associate exam
- Pass the Aruba Certified Design Professional exam on PearsonVUE
- Pass the current exam on PearsonVUE
Typical candidates for this course are IT Associate who want to learn about the Aruba products and the tools used to help design a network.
Sample Questions
NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each buildingâs lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:
- Provide a dedicated 5 Ghz radio for lobby connectivity
- Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas
Which solution would best meet NewRocketâs requirements?
- The Aruba AP 387 with Cat 7 cabling
- Aruba AP 374 with MMF cabling
- Aruba AP 535 with Cat 7 cabling
- Aruba AP 500 with MMF cabling
A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?
- By a factor of 2
- By a factor of 4
- By a factor of 1
- By a factor of 8
A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The APâs smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?
- 5 Gbps
- 1 Gbps
- 2.5 Gbps
- 10 Gbps
How would a network administrator view the price list of the equipment in one wiring closet?
- Create a Workspace in the site; set filter in the BOM to the Workspace
- Create a Design Group in the site; set the filter in the BOM to the Design Group
- Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
- Create a Design Group in the Site; set the filter in the Layers to Design Group
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- Density of users
- Number of users per location
- Mobility requirements and usage
- Type of users
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- Encountering RF interference by devices
- Implementing adequate security measures to ensure PCI compliance
- Providing consistent performance on all available channels
- Roaming between APs
- Determining the RF channel bandwidth consumed per Barcode scanner
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
Given this information, which Aruba solution would be the most cost-effective while still meeting the customer’s requirements?
- A standalone 7008 controller per floor
- Two 7030 mobility controllers in a cluster
- Two 7205 mobility controllers in a cluster
- An IAP cluster per floor
Which must you perform in IRIS to assign a device to a Design Group?
- Right-click the device and select Set Layer Membership
- Drag and drop the device into the Design Group
- Drag and drop the device into the Site
- Right-click the device and select Set Design Group
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.
What type of survey should the network architect perform?
- Active
- Virtual
- Passive
- Spectrum clearing
NEW QUESTION 15
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11g
- B. 802.11ac
- C. 802.11ax
- D. 802.11n
Answer: C
NEW QUESTION 16
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 0
- B. 303H
- C. 203R
- D. 1
Answer: C
NEW QUESTION 17
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Passive
- B. Virtual
- C. Active
- D. Spectrum clearing
Answer: C
NEW QUESTION 18
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3 feet (1 m)
- B. 3-10 feet (1-3 m)
- C. 15-30 feet (5-10 m)
- D. 30-60 feet (10-20 m)
Answer: A
NEW QUESTION 19
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Determine the number of users per location.
- B. Implement appropriate security controls
- C. Provision adequate bandwidth.
- D. Provide appropriate AP density.
Answer: D
NEW QUESTION 20
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 21
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- B. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- C. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- D. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
Answer: C
NEW QUESTION 22
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2930F
- B. Aruba 2540
- C. OfficeConnect 1950
- D. Aruba 2930M
Answer: D
NEW QUESTION 23
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. iPsec tunneling
- B. GRE tunneling
- C. PAPI mobility
- D. Dynamic segmentation
Answer: A
NEW QUESTION 24
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 40 MHZ
- B. 10MHZ
- C. 60 MHZ
- D. 20 MHz
Answer: C
NEW QUESTION 25
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 6300 series
- B. 5400R series
- C. 8300 series
- D. 3810M series
Answer: D
NEW QUESTION 26
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
- B. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- C. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
- D. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
Answer: B
NEW QUESTION 27
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Site-1
- B. Topology
- C. Start Page
- D. Catalog
Answer: A
NEW QUESTION 28
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11r
- C. 802.11 ax
- D. S02.11h
Answer: C
NEW QUESTION 29
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?
- A. Aruba 7240XM mobility controllers and 3810M switches
- B. Aruba 7220 mobility controllers and 3810M switches
- C. Aruba 7210 mobility controllers and 5406R switches
- D. Aruba 7280 mobility controllers and 5406R switches
Answer: B
NEW QUESTION 30
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. FRAPs in a cluster
- B. Two 7205 mobility controller and campus APs in a cluster
- C. Two 7030 mobility controller and campus APs in a cluster
- D. lAPs in a cluster
Answer: A
NEW QUESTION 31
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. encountering RF interference by devices
- B. providing consistent performance on all available channels
- C. implementing adequate security measures to ensure PCI compliance
- D. determining the RF channel bandwidth consumed per Barcode scanner
- E. roaming between APs
Answer: B,C
NEW QUESTION 32
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. Backplane stacking
- B. VSF
- C. Distributed trunking
- D. VSX
Answer: D
NEW QUESTION 33
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
- A. Clustering
- B. IAP VC
- C. Client Match
- D. AirMatch
Answer: A
NEW QUESTION 34
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan View
- B. Define the appropriate dimensions of a Floorplan and Building View
- C. Define the appropriate dimensions of each object in a Floorplan View
- D. Define the appropriate dimensions of each room in a Floorplan View
Answer: C
NEW QUESTION 35
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. type of users
- B. mobility requirements and usage
- C. density of users
- D. number of users per location
Answer: B
NEW QUESTION 36
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 2
- D. 1,030
Answer: D
NEW QUESTION 37
......
HPE6-A66 Exam Dumps Pass with Updated 2021: https://www.examboosts.com/HP/HPE6-A66-practice-exam-dumps.html
Free HPE6-A66 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1BbEd8ptyT-Hd4T7aPyvLK0MQZoR2eyDf