Pass HPE0-S60 Exam in First Attempt Guaranteed 2024 Dumps!
HPE0-S60 Dumps Full Questions - Exam Study Guide
HPE0-S60 exam is intended to test an individual's knowledge of HPE ProLiant, BladeSystems, Synergy, and Apollo servers, as well as HPE OneView and HPE Integrated Lights-Out (iLO) management tools. Additionally, it will assess an individual's ability to troubleshoot, administer, and optimize HPE compute solutions to meet the needs of businesses of all sizes. HPE0-S60 exam consists of 60 multiple-choice questions and has a duration of 1.5 hours.
HP HPE0-S60 Certification Exam is a Delta exam, which means that it is designed for individuals who already hold a HPE ATP or ASE certification. The Delta exam is intended to test the knowledge and skills of an individual in the areas that have changed since they last took the certification exam. The HP HPE0-S60 Delta exam is a 90-minute exam that consists of 40 multiple-choice questions. HPE0-S60 exam is available in English, Japanese, and Simplified Chinese.
NEW QUESTION # 34
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. An additional license is required to change the enclosure count
- B. Both modules are located in different frames for redundancy
- C. For an uplink set, ports from different modules can be selected
- D. interconnect modules are installed in interconnect bays 1 and 4
Answer: A
NEW QUESTION # 35
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. If the logical enclosure is built on at least three HPE Synergy frames
- B. if both FiexNICs are connected to different networks
- C. if the logical enclosure is configured with redundant master modules
- D. if both FiexNICs are configured with the same speed
Answer: D
NEW QUESTION # 36
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant DL580 Gen10
- B. HPE Synergy 480 Gen10 Plus
- C. HPE Superdome Flex system
- D. HPE ProLiant OL380 Gen 10 Plus
Answer: B
NEW QUESTION # 37
Which statement about HPE Superdome Flex 280 is true?
- A. it cannot be managed using HPE OneView.
- B. It must be equipped with at least 768 GB of memory.
- C. It can support up to two nPars with an external RMC.
- D. It supports 2 to 8 sockets in 2-socket increments.
Answer: B
NEW QUESTION # 38
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 39
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- B. HPE OneView replaces array management tools for both types of array
- C. HPE MSA 2062 Storage Array is not supported in HPE OneView
- D. HPE Primera 650 can be managed using HPE OneView.
- E. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
Answer: A
NEW QUESTION # 40
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 41
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If an compute nodes are added to the vCenter Server
- B. If HPE OneView credentials are added in vCenter Server
- C. If the HPE Oneview instance Is integrated with HPE OV4VC.
- D. If vCenter Server is licensed in the HPE Oneview interface
Answer: A
NEW QUESTION # 42
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?
- A. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
- B. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
- D. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
Answer: D
NEW QUESTION # 43
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- B. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
- C. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
- D. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
Answer: B
NEW QUESTION # 44
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- C. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- D. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
Answer: D
NEW QUESTION # 45
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. To use interconnect bay set 3, all compute nodes must be half-height
- B. Both master modules are located in the same HPE S ynergy frame
- C. The master modules are located in the interconnect bays 2 and 5
- D. For the given downlink speed, the maximum number of frames is reached
Answer: B
NEW QUESTION # 46
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- B. To use all compute nodes, the customer must create at least two logical enclosures
- C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- D. The customer can add one D3940 storage Module to each of the frames
Answer: C
NEW QUESTION # 47
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 48
Match HPE SimpliVity term with the definition.
Answer:
Explanation:
NEW QUESTION # 49
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- C. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
- D. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- F. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
Answer: B,D
NEW QUESTION # 50
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- B. Only HPE Superdome Flex supports HPE Persistent Memory
- C. Only HPE Superdome Rex 280 can be managed using HPE OneView
- D. Only HPE Superdome Flex 280 can support multiple nPars
Answer: C
NEW QUESTION # 51
......
HPE Technical Free Certification Exam Material from ExamBoosts with 82 Questions: https://www.examboosts.com/HP/HPE0-S60-practice-exam-dumps.html
Use Real HPE0-S60 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=190Gb5v8EuCfJoY9-mTCkhAm9n_8u-jxZ