[Sep-2021] Practice Huawei H35-561 exam. Online Exam Practice Tests with detailed explanations! Pass H35-561 with confidence! [Q17-Q37]

Share

Practice HCNP-LTE RNP & RNO H35-561 exam. Online Exam Practice Tests with detailed explanations! Pass H35-561 with confidence!

H35-561 - HCIP-LTE-RNP&RNO V1.0 Practice Tests 2021 | ExamBoosts

NEW QUESTION 17
When single-station verification, if random access failure is found, what are the common reason?

  • A. Core network configuration problem
  • B. Channel environmental impact
  • C. eNodeB side parameter configuration problem
  • D. UE side parameter configuration problem

Answer: B,C,D

 

NEW QUESTION 18
3 GPP specification for CA: The CA UE can aggregate (transmit/receive) up to 5 component carriers, each carrier having a maximum of 20 MHz.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 19
The PUCCH channel can carry uplink control information, and the PUSCH channel can carry uplink dat a. A user can use these two channels at the same time.

  • A. wrong
  • B. True

Answer: A

 

NEW QUESTION 20
CCE is the smallest resource unit for PDCCH transmission. Which of the following descriptions about CCE are correct? (Multiple choice)

  • A. PDCCH with aggregation level 1 with the highest code rate and the worst demodulation performance
  • B. eNodelB can be 1, 2, 4, 8 CCEs polymerized together to form a PDCCH
  • C. When the channel condition is good, the system message will use the PDCCH of 1CCE.
  • D. PDCCH with aggregation level of 8 with the lowest code rate and best demodulation performance

Answer: A,B,D

 

NEW QUESTION 21
Which of the following channels is used for resource allocation for paging and user data?

  • A. Physical broadcast channel
  • B. Physical downlink control channel
  • C. Downlink shared physical channel
  • D. Physical paging channel

Answer: B

 

NEW QUESTION 22
How many paging records can a paging message carry in a cell with a 20 MHz bandwidth in an LTE network?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 23
Which of the following reference signals are common to LTE TDD and FDD systems?

  • A. Uplink reference signal SRS
  • B. Uplink reference signal DM RS
  • C. Cell specific RS
  • D. UE specific RS

Answer: A,B,C

 

NEW QUESTION 24
Which of the following parameters will affect the power control of the PUSCH channel (Msg3)? (Multiple choice)

  • A. Msg3 relative to the power offset value of PRACH format 0
  • B. Power offset values of different MCS formats relative to the reference NCS format
  • C. The total power increase of the preamble
  • D. Msg3 maximum transmission times

Answer: A,B,C

 

NEW QUESTION 25
Which of the following schemes does the CSFB program mainly support? (Multiple choice)

  • A. Providing a voice solution under the LTE network
  • B. Reuse the operator's traditional circuit domain network to protect investment and avoid operators deploying IMS system
  • C. Providing short messages under the LTE network
  • D. Location service

Answer: A,B,C,D

 

NEW QUESTION 26
Which of the following is not a key concern for PCI planning?

  • A. Frequency
  • B. Cell location relationship
  • C. TA ownership
  • D. RS position

Answer: C

 

NEW QUESTION 27
Which of the following is wrong about the TDM eICIC statement?

  • A. ABS (Almost Blank Subframe) refers to not transmitting user specific PDCCH and PDSCH on certain subframes of a cell, because these two types of channels occupy most of the resources (CCE and RB) of each subframe, so Such a subframe is called an ABS subframe.
  • B. The microcell schedules interfering UE in the macro station ABS subframe
  • C. TDM eICIC is a HetNet interference coordination solution
  • D. The microcell schedules interference UE in the normal subframe of the macro station

Answer: B

 

NEW QUESTION 28
When the service-based handover measurement is initiated, if no handover is triggered, elNodeB will maintain E for continuous heterogeneous system measurements.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 29
Regarding the CSFB to GSM heterogeneous system neighborhood planning principles, which of the following are correct?

  • A. Priority to add co-site cells and the first layer to the adjacent area
  • B. Priority in capacity planning based on capacity planning
  • C. Can draw on the 2G neighboring configuration of the 3G network for planning
  • D. Coverage generally refers to the GSM900MHz band

Answer: A,B,C

 

NEW QUESTION 30
The PCI plan is only for the same-frequency neighboring area. If it is an inter- frequency neighboring area, you can use the same PCI directly without considering the PCI planning.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 31
Which of the following is the timer for the UE to wait for the handover to succeed?

  • A. T304
  • B. T300
  • C. T302
  • D. T301

Answer: A

 

NEW QUESTION 32
The path loss obtained by the link budget is the median value, and the actual path loss fluctuates above and below this value. In order to ensure a certain edge coverage (such as > 75%), a certain margin needs to be reserved. What is the difference between this margin and the following characteristics of radio wave propagation?

  • A. Frequency selectivity
  • B. Shadow fading
  • C. Depolarization
  • D. Fast decline

Answer: A,C,D

 

NEW QUESTION 33
Which of the following description of CA is wrong?

  • A. NAS message is transmitted on Pcell
  • B. Pcell occurs reconstruction when RLF occurs
  • C. The UE is assigned two C-RNTIs
  • D. Pcell cannot be deactivated

Answer: C

 

NEW QUESTION 34
Which of the following are key indicators of concern for LTE network planning? (Multiple choice)

  • A. Cell load
  • B. throughput rate
  • C. RSRP
  • D. CRS SINR

Answer: B,C,D

 

NEW QUESTION 35
RSRP is a parameter that measures channel quality, unit dB, affecting user switching and download rates.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 36
R esource Allocation Mode 2 indicates to the scheduled UE a series of consecutive virtual allocation resource blocks.
What information is there in the scheduled resource allocation field? (Multiple Choice)

  • A. Downstream power compensation field
  • B. Resource indication value RIV corresponding to the starting resource block
  • C. Indicates the fields of the selecting RBG subset in P RBG subset
  • D. Continuously allocated resource block length

Answer: B,D

 

NEW QUESTION 37
......

The best H35-561 exam study material and preparation tool is here: https://www.examboosts.com/Huawei/H35-561-practice-exam-dumps.html