Steps Necessary To Pass The C-IBP-2311 Exam from Training Expert ExamBoosts
Valid Way To Pass SAP Certified Application Associate's C-IBP-2311 Exam
NEW QUESTION # 24
Which of the following checks for master data and key figures does the Check Mode algorithm trigger? Note: There are 3 correct answers to this question.
- A. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network
- B. It checks whether the location resource specified in the master data forms a cycle in the supply chain network
- C. It checks whether the sourcing in the Production Source Item master data type exists.
- D. It reports input key figure for which no related master data exists.
- E. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network
Answer: A,C,E
NEW QUESTION # 25
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct answers to this question
- A. Complex calculation graphs for key figures
- B. Number of analytics charts displaying key figures' values
- C. Excessive SAP IBP fromating in the Microsoft Excel UI
- D. Number of local members and complexity of calculation
Answer: A,C
NEW QUESTION # 26
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct answers to this question
- A. Choose time-independent key figures as segmentation measures
- B. Identify inventory items that quire closer attentions
- C. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B"
- D. Substitute missing values in case of sporadic demands.
Answer: A,B
NEW QUESTION # 27
Which Maintenance, Repair, and Overhaul (MRO) parts planning processes are included in SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question.
- A. Demand Driven Replenishment
- B. SAP Intelligent Asset Management
- C. Supply Planning
- D. Demand Planning
- E. Inventory Optimization
Answer: C,D,E
NEW QUESTION # 28
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct answers to this question
- A. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation u level.
- B. Key figure can be calculated across the different planning levels
- C. The calculation chain for a key figure must always result in a calculated key figure
- D. All key figure calculation have calcuation inputs, which can be marked as stored or calucated
Answer: B,D
NEW QUESTION # 29
What function would you use to configure a year-to-date calculation?
- A. Last Period Aggregation
- B. Cumulative Aggregation
- C. Rolling Aggregation
- D. Dynamic Rolling Aggregation
Answer: B
NEW QUESTION # 30
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand. Which solutions would apply to this scenario? Note: There are 2 correct answers to this question.
- A. Capacity leveling will be possible for production and storage resources.
- B. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs
- C. Minimum capacity utilization will result in pull production
- D. Excess stock can be generated and will need to be staged in an overflow warehouse
Answer: B,D
NEW QUESTION # 31
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: Thereare 2 correct answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view
- B. These filters can be used together with attributes totals in the same planning view
- C. You can add (or delete) planning objects to a planning view after these filters are applied
- D. You can only apply one value-based filter per planning view.
Answer: B,C
NEW QUESTION # 32
What are the relevant use cases for helper key figures? Note: There are 2 correct answers to this questions.
- A. Used at any level of calculation level except the Request Level
- B. Used by end-users in planning views to help visualize cross-period calculations
- C. Used to break down a large calculation into manageable subcalcuations
- D. Used when you have more than three inputs at the different planning level in one calculation
Answer: C,D
NEW QUESTION # 33
Which apps can be enhanced with analytical charts? Note: There are 2 correct answers to this question.
- A. Web-based Planning
- B. Intelligent visibility
- C. Planner Workspace
- D. Dashboards Advanced
Answer: C,D
NEW QUESTION # 34
What is an example of a commonly used time-independent key figure?
- A. A unit of measure key figure, such as UoM Conversion Factor
- B. A currency conversion key figure, such as Exchange Rate
- C. A Special key figure marked as an aggregate key figure (aggregate constraint)
- D. Any attribute as a key figure
Answer: D
NEW QUESTION # 35
You need to make manual adjustments to your S&OP plan. Which are possible ways of making these changes? Note: There are 2 correct answers to this question
- A. Leveraging the functionality of SAP Work zone
- B. Using Microsoft Excel planning views
- C. Leveraging the web-based Planning capability
- D. Using Driver-Based planning
Answer: B,C
NEW QUESTION # 36
Which type of master data represents the Master Data Type Component?
- A. Reference Master data type
- B. Virtual mater data type
- C. Compound Master Data Type
- D. External Master Data Type
Answer: A
NEW QUESTION # 37
For which of the following application jobs can you enter planning filters as parameters? Note There are 2 correct answers to this question.
- A. Purge Master Data
- B. Purge Non-Conforming
- C. Purge Key Figure Data
Answer: A,C
Explanation:
Create Time Periods for Time Profiles
NEW QUESTION # 38
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question
- A. Activate Local Member recognition settings is selected
- B. Users should have authorization for template administration.
- C. Use Excel Cell reference in the report editor option is selected
- D. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel
Answer: A,B
NEW QUESTION # 39
Analytics charts are created by the user in the Advanced Analytics application. What can the user do in the Advanced Analytics app? Note: There are 2 correct answers to this question.
- A. Applying filters on there data
- B. Merge charts together.
- C. Group Data
- D. Trigger export to Manage Analytics stories
Answer: A,C
NEW QUESTION # 40
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The total value can be added before or after the selected attribute
- B. The values of the attribute-based total at the highest attribute level in the planning level can be - changed
- C. The Total number of the attribute that can use subtotal in the planning view can be restricted
- D. Only attribute-based totals can be added to the planning view.
Answer: A,C
NEW QUESTION # 41
Which planning operators can be executed in a time-series-based planning area? Note: There are 2 correct answers to this question
- A. Constrained Forecast Run
- B. Deployment Optimizer
- C. Finite Heuristics
- D. Shelf Life Heuristics
Answer: A,C
NEW QUESTION # 42
You are working with inventory key figures. What are some of the business scenarios where you can use the Last Period Aggregation function? Note: There are 2 correct answers to this question
- A. Calculating how many periods inventory is going to last based on the planned demand
- B. Calculating the value of inventory on any level from the time profile, ensuring flexibility of calculation
- C. Calculating the value of inventory on on weekly basis, using static argentation from the daily 'evel
- D. Searching for and returning the last not-full value of the inventory key figure
Answer: B,C
NEW QUESTION # 43
What are the possible Master Data Maintenance options for SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question
- A. The Planner Workspaces app
- B. The SAP IBP, add - in for Micorsoft Excel
- C. The Manage Master Data app
- D. The data Integration job app
- E. The Planning Areas Model Configuration app
Answer: B,C,D
NEW QUESTION # 44
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check Which settings can you change and still run a successful consistency check? Note: There are 2 correct answers to this question
- A. Change the past and future horizon of the level in the time profile
- B. Change the description of attribute in the time profile
- C. Add a new time profile level to the time profile
- D. Change the numbering hierarchy of the period IDS in the time profile.
Answer: A,B
NEW QUESTION # 45
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation? Note: There are 2 correct answers to this question.
- A. The key figure is calculated and system editable
- B. The key figure is stored and all editable
- C. The key figure is calculated and all editable.
- D. The key figure is stored and system editable.
Answer: B,D
NEW QUESTION # 46
......
SAP C-IBP-2311 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
All C-IBP-2311 Dumps and Certified Application Associate - SAP IBP for Supply Chain Training Courses: https://www.examboosts.com/SAP/C-IBP-2311-practice-exam-dumps.html
Free Test Engine For Certified Application Associate - SAP IBP for Supply Chain Certification Exams: https://drive.google.com/open?id=1eqRmJ7wD5jc6JkthXHG0jSyYt0o3JFtH