Verified 300-610 exam dumps Q&As with Correct 120 Questions and Answers
Cisco 300-610 Test Engine PDF - All Free Dumps from ExamBoosts
The Cisco 300-610 exam is designed to assess the students’ understanding of designing the infrastructure of data center by covering the following topics:
- Compute Design (25%): This domain includes the concepts of Ethernet connectivity, such as redundancy, over-subscriptions, and operation modes. Therefore, you must be capable of evaluating various options for storage connection along with the virtualization of network devices in data centers. This includes IOM uplinks, vCon, Ethernet adaptor policies, and policies for the Fiber Channel adapter. The individuals’ knowledge of various hyperconverged infrastructure options, such as cluster mode, desktop virtualization, and HX for the virtual server, is also necessary.
- Network Design (35%): This area implies that the potential candidates have knowledge of the Layer 2 connectivity concepts, such as endpoint mobility, availability of redundancy, convergence, and insertion of services. Their understanding of Layer 3 connectivity as well as its elements (IP mobility, graceful restart, and NSF, convergence) and insertion of services is also required. The applicants should be capable of evaluating various data center-related technologies, including vPC, vPC+, VXLAN EVPN, and OTV. Moreover, they need to have a comprehension of various options for routing virtualization and in-band/out-of-band for management.
- Storage Network Design (20%): As for this section, the test takers should demonstrate their knowledge of the iSCSI deployment plan, including addressing and multipathing schemes and QoS requirements in a data center (FCoE, Iscsi, Fibre Channel, FCIP). Furthermore, this part checks one’s ability to work with Fiber Channel interface, FCoE, and SAN network topology.
- Automation Design (20%): The final objective of the test deals with network orchestration along with its automation. Therefore, the examinees must understand DCNM, Inter-sight, NX-API, and Python and should be able to evaluate templates for service profiles, vNIC, vHBA, as well as global and local policies.
It is important to pay attention to every part of the exam content if you want to excel in the Cisco 300-610 test and earn the passing score, so be ready for a thorough preparation process.
4. Automation Design
- Weightage allotted – 20%
This domain mostly aims to check one’s knowledge of the concepts like the evaluation of the options for network orchestration, compute orchestration, and automation. To answer all the related questions correctly, the candidates need to be familiar with DCNM, NX-API, Puppet, Intersight, Ansible, Python, vHBA and vNIC templates, and service profile templates, among the rest.
NEW QUESTION 68
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 69
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.
Which FCoE solution meets these requirements?
- A. at least two VSANs across the fabric
- B. single VSAN across the fabric
- C. single switch with multiple links
- D. at least two FC zone sets with multiple zones
Answer: A
NEW QUESTION 70
Which orchestration tool should be used for the management and analytics of servers across multiple sites?
- A. Cisco Data Center Network Manager
- B. Cisco Nexus Fabric Manager
- C. Cisco Intersight
- D. Cisco UCS Manager
Answer: C
NEW QUESTION 71
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/ configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/ creating-vdc.html
NEW QUESTION 72
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. uses all available uplink bandwidth
- B. no spanning-tree blocked ports
- C. supports Layer 3 port channels
- D. disables spanning-tree
- E. maintains single control plane
Answer: A,B
NEW QUESTION 73
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Use the port-monitor command to detect slow drain devices.
- B. Configure the flow control for the FC to use R_RDY.
- C. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- D. Configure the port monitor to allow categorization of a specific device as slow.
- E. Configure the port channel to enable individual buffer-to-buffer credits.
Answer: A,D
Explanation:
Reference:
cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION 74
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. NPV feature on the Cisco MDS Series.
- B. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- C. end-host mode feature on the Cisco UCS Fabric Interconnects
- D. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- E. NPIV feature on the Cisco MDS Series
Answer: A,E
NEW QUESTION 75
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected. Which feature must be used to meet these requirements?
- A. disruptive load balancing
- B. DVM
- C. multiple VSAN support
- D. NPIV
Answer: D
NEW QUESTION 76
A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline. Which action meets these requirements?
- A. Enable failover for the vHBA with VSAN55 and VSAN95 enabled.
- B. Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.
- C. Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.
- D. Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.
Answer: B
NEW QUESTION 77
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
- A. Physical interface
- B. management interface
- C. interface VLAN
- D. lookup
Answer: B
NEW QUESTION 78
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 79
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 80
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
- B. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- D. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
Answer: D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf
NEW QUESTION 81
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?
- A. VRF
- B. VDC
- C. vFC
- D. vPC
Answer: A
NEW QUESTION 82
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. Internet Small Computer Systems Interface
- B. raw device mapping
- C. Fibre Channel over Ethernet
- D. server message block
Answer: C
Explanation:
Reference:
HyperFlex_HX_DataPlatformSoftware/Network_External_Storage_Management_Guide/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0_chapter_010.html
NEW QUESTION 83
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. potential data loss
- B. distance limitations
- C. specific backup requirements
- D. reduction in application performance
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous- replication-vs-asynchronous-replication/
NEW QUESTION 84
An engineer is experiencing performance issues on a Cisco UCS blade server. The B-Series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic.
Which policy must be used to alleviate these issues?
- A. vNIC placement
- B. Ethernet adapter
- C. dynamic vNIC connection
- D. LAN connectivity
Answer: C
NEW QUESTION 85
......
The Cisco 300-610 exam is one of the requirements for obtaining the CCNP Data Center certification. This test is crafted to check the individuals’ understanding of designing the infrastructure of data centers, including their knowledge of networking, computing, storage networking, as well as automation. This is a concentration exam, which validates your expertise in working with the Cisco networking devices used by the companies worldwide. If you don’t plan to deal with the Cisco 350-601 test to get CCNP Data Center, you will only earn the specialist-level certificate to have proof of your skills.
All in all, each candidate has to pass two exams to get certified. Cisco 350-601 is a core test that validates your knowledge base to prepare it for the specialized skills that you learn while studying for this qualifying exam. It focuses on the specific topics and verifies your expertise in working with data center solutions that imply their implementing, troubleshooting, designing, and configuring. The network engineers and administrators are the ideal applicants for this certification test to demonstrate their skills in taking advantage of scalable automation solutions and securing the infrastructure.
100% Passing Guarantee - Brilliant 300-610 Exam Questions PDF: https://www.examboosts.com/Cisco/300-610-practice-exam-dumps.html
Get New 300-610 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=12wQPSKFDOKgoAaYvk60CzbO6tMRMC9hw